very lightly relic'd genuine Fender Gold Four Bolt Neck Plate (gold plated steel) +screws p/n 0991447200 (blank, NO Micro-Tilt Adjustment) from 2002-2003 SRV Artist Ser Strat (NO guitar) but can be used on dif year guitar / bass] Screws: # 8, 1&1/4" L

Up for grabs is a lightly used / very lightly relic'd (has some visible very light & light imperfections) genuine Fender Gold Four Bolt Neck Plate (gold plated steel). Come with four gold mounting screws. This neck plate is BLANK [NO info / NO imprint / NO etching(s)]. NO Micro-Tilt Adjustment.

• Fender p/n: 0991447200

Please review all of the pictures because in some pictures hardly any imperfections show up. And in most pictures - not all of the imperfections that the Top Side (and even the Bottom Side) of ths Neck Plate has all show up in one or more picture. Also - some pictures were taken in a lower light to better show the imperfections. And some pictures were taken in a regular light and / or with the camera's flash on - but in these pics are glares and most of the imperfections do not show up.

Specific details about the condition of this item, measurements, etc are further down in the description.

Product info / Specs:

Vintage-style neck plate for use on most U.S.- and Mexico-made Fender guitars and basses using four-screw neck mounting without Micro-Tilt™ adjustment. Mounting screws included.

Features

• Vintage-style 4-bolt neck plate
• No logo or serial number
• Mounting screws included
• For most U.S.- and Mexico-made Fender guitars and basses with four-screw neck mounting and no Micro-Tilt adjustment (1952-present)

==

This Neck Plate + mounting screws is specifically from a lightly used 2002-2003 Fender Stevie Ray Vaughn Artist Series Stratocaster that I parted out a couple of years ago (NO guitar included / NO other parts included). But it can be used on different year guitar / bass that uses this style, size, shape neck plate and that uses 4 mounting screws.

• NOTE: I'm going to list the control harness from that guitar soon. After I do - I'll add the Reverb link for in in this description.

--

Back to info about the neck plate + screws that for sale in the listing that you're looking at now.

Measurements:

• Width of Neck Plate: 2 inches
• Length of Neck Plate: 2 and 1/2 inches
• Left to Right mounting hole spacing: 1 and 1/2 inches
• Up to Down mounting hole spacing: 2 inches
• ====
• Screw type: # 8 Screw Length: 1 and 1/4"

Since this Neck Plate was previously on a guitar: has a couple of visible - but not too serious imperfections. Some may say that it is very lightly relic'd. The imperfections that it has are from actual use.

OUTER AREA of Neck Plate:

• Main areas have: A couple of visible - but not too serious imperfections: a couple of not too light / not too deep - but visible - very light & light very short, short, & medium length hair-line surface scratches. Also - a couple of not too light / not too deep - but visible - very tiny, tiny, & very small nicks.
• Plus it has a couple of very light surface cloudy spots & and some extremely light very thin vertical hair-line surface scratches (which I think were caused by the neck plate touching against the HS Case (NO HS CASE included) when it was on the guitar (NO guitar included) and in the case. The cloudiness and extremely thin hair-line scratches show up more in some of the pictures than they appear in person.
• The areas near three of the four the top side edges (meaning the Top Side border) each have a medium length horizontal cloudy line (which are really a grouping of extremely short scratches next to each other in a row - resembling thin light surface scuffs).
• Some of the imperfections that I mentioned above - do not stand out that much and are more visible when you looking are the neck plate up close -- and / or if you really examine it.
• All of the gold finish is on.

BOTTOM SIDE of Neck Plate:

• It has some extremely tiny & tiny - but visible - surface nicks and a few extremely short and very short -- not too light / not too deep -- hair-line scratches. One area has a long horizontal very light hair-line surface scratches
• There is extremely light unevenness in the gold finish that looks like many extremely tiny nicks - but's just the way that the finish was applied on this side of the neck plate and also from this side of the neck plate touching against the guitar's body (and / or maybe these imperfections are just the way that the metal is like under the finish).
• All of the gold finish is on.

Screws:

• They are clean. The gold finish on the heads and even on the threaded areas are fine.

--

As I stated earlier in the description - some pictures were taken in a lower light to better show the imperfections. And some pictures were taken in a regular light and / or with the camera's flash on - but in these pics are glares and many of the imperfections do not show up.

==

I took many pictures of this neck plate, a few pics of the screws, and there are a couple pictures showing the measurements with a ruler. Feel free to ask for more pictures.

NOTE: There may be some imperfections that I overlooked. There may be a some imperfections that can be seen in person that do not appear in the pictures.  There are some imperfections that show up more in some of the pictures than they appear in person. And - there are some things show up in the pictures that are not that visible in person (like glares, reflections, cloudiness, and dust specks). 

+++

• Comes from a smoke free and pet free environment.
• Feel free to ask questions.
• Will discount shipping on combined purchases!!

• USA Shipping is with USPS (with tracking).
• International Shipping is with First Class Mail International (with tracking).

CA Prop 65 Warning!
Everything sold into the state of California contains agents known to the state of California to cause cancer and birth defects, reproductive harm, or other, as yet unnamed, harm to its citizenry.