Land Devices Hunter Stereo Distortion Pedal (Red)

WHAT YOU WERE MISSING

Hunter was developed out of necessity; a friend needed a stereo gain effects pedal with a blend control. He was right and I needed one too. None were to be found, so we made it ourselves.

Hunter is based on a classic op-amp circuit with proper tone shaping added. Independent treble and bass controls let you really dial things in.

CONTROLS

• GAIN: Turn clockwise to increase distortion.
• LVL: Output volume level.
• Dry | Wet: Fully CCW is 100% dry signal. Fully CW is 100% wet signal.
• HI: Controls treble frequency. CCW for less, CW for more.
• LO: Controls bass frequency. CCW to less, CW for more.

• 137mm x 80mm x 67mm
• Input impedance: 500kOhm
• Output impedance: 1kOhm
• Buffered bypass with relay switching
• 1/4" TRS I/O for stereo
• 1/4" TS I/O for mono
POWER REQUIREMENTS
• +9VDC
• 2.1mm center negative barrel
• 30mA current draw