Made only briefly from 2000-2001, the S2020X was an Ibanez Prestige model from the S series that was made by the Fujigen factory in Japan. The original pickups have been swapped out with a pair of Dimarzio humbuckers (a DP224 AT-1 and a DP213 PAF Joe), otherwise it appears to be original. 
There's a few signs of wear and tear as pictured with some cosmetic dings but no structural breaks or repairs. The neck is straight and the truss adjusts as it should, the frets show some signs of wear but play smoothly. 
Full info from the Ibanez wiki below:

The S2020X features a mahogany body bolted to a maple Wizard neck with a 22-fret rosewood fingerboard with offset dot position markers on the 12th fret. Components include a double locking tremolo bridge with integrated L.R. Baggs piezo pickups which offer an acoustic-like tone and Gotoh tuning machines.

The S2020X features a Double Edge tremolo with a built in L.R. Baggs piezo system which offers an acoustic-like tone. The mahogany body is bolted to a maple neck with a 24-fret rosewood fingerboard with a pair of small, offset abalone dot position markers at the twelfth fret. Other components include a pair of Ibanez Vintage humbucking pickups and Gotoh tuning machines.

The S2020X has dual output jacks. A small push-button controls these outputs. When this switch is in the up position the signal is split with the piezo going only to the upper jack and the magnetic pickup signal going only to the lower jack. When the push-button switch is down the upper jack is disabled and the lower jack provides signal from either the piezo or magnetic pickups based on the position of the 2-way mini toggle switch.