The GED-2112 is the Geddy Lee signature SansAmp, created by distilling a rackload of equipment into a single rackspace. It introduced a new format for Parallel Pre-Amping: two separate internal pre-amps running in parallel.

The Drive pre-amp section is based on the versatile SansAmp RPM and offers a wide range of sonic possibilities. The Deep pre-amp section adds low-end boost for thick, meaty tones, while Saturation goes from clean at lower settings to increased harmonics and tube-like compression at higher settings. The EQ curve is pre-set to Geddy's personal specs. You can use either section independently, or blend them externally direct to a mixing board as well as to two amplifiers.

• Dual, all-analog SansAmp circuits
• Drive control for gain and overdrive
• Blend adjusts the ratio of SansAmp tube amp emulation and your direct signal
• Sweepable semi-parametric EQ, 170 Hz to 3.0 kHz, cut/boost 12 dB
• Saturation for low-end beef with a separate Level control
• Deep pre-amp with dedicated 1/4-inch and XLR direct outputs
• Effect Loop with Mix 50/50 switch
• Tuner output and uneffected 1/4-inch output
• Front panel A/B switching for two basses, dual rear inputs with -20 dB input pads
• Built-in analog speaker/cab sim with a smooth, even response, like a multiply-miked cabinet