very near A+ (rarely used) genuine Fender Tex-Mex Stratocaster Bridge Single Coil Pickup, 7.4k full strength, White Cover (p/n # 50659000) +screws & rubber bushings, Alnico 5 magnets, staggered pole pieces, Polysol magnet wire, vinyl output wires

Up for grabs is a very near A+ (rarely used) genuine Fender Tex-Mex Stratocaster BRIDGE Single Coil Pickup, 7.4k full strength. Fender p/n (part number) 50659000 - also written as 0050659000. White Cover. Alnico 5 Magnets, Staggered Pole Pieces, Polysol Magnet Wire,Vinyl output wires. From 2020s. Made in MEXICO.

• Comes with screws (chrome finish - phillips heads) and rubber bushings.

Please let me know if you prefer a different color cover instead of White.

• I have Black and Aged White.

NOTE: the complete Fender Tex-Mex N, M, B pickup set is NOT for sale. But as a reference - here's the Fender p/n (part number) when sold as a set: 0992131000.

NOTE: Overwound BRIDGE pickup for maximum output: 7.4k

• the Neck and Middle Tex Mex pickups (which are NOT included)- each have a DCR of 6.4k

==

This pickup was briefly installed on a Fender Mexi Strat (guitar NOT included) - but that guitar was not used that much with this pickup in it. I decided to go with a different bridge pickup and carefully took off this Fender Tex Mex bridge pup.

In white marker - the bottom side of the pickup is factory marked 506900 (which means Tex Mex Bridge. This model pup is made in Mexico. And it has a few other markings in white marker.

The mold of the bottom side of the bobbin has this imprint: 016730 (which is a common number imprinted on Fender bobbins).

• 016730 is NOT the model # of the pickup.

==

The WHITE pickup cover is extremely clean.

• Please let me know if you prefer a different color cover instead of White. I have Black and Aged White.

The TOP Side of the bobbin part (pickup with the cover off) is fine. It just has some not too serious wax residue and a few natural imperfections.

The BOTTOM Side of the bobbin part of the pickup clean with some natural imperfections and a few small minor cloudy surface spots.

The magnet wire is fine.

The black and yellow wires are fine.

The screws are clean - a few areas of the threaded part have some minor surface residue. Screws have Chrome finish - Phillips heads.

The rubber bushings are clean (actually they are new.
==

The DC Resistance (DCR) of the BRIDGE pickup for sale in this listing is 7.4k. Full strength. Multimeter reading taken on April 23, 2026. Room temperature was 68° F.

• The average DCR for this model pickup is 7.4k

The wires are vinyl coated.

LENGTH of Wires:

Yellow:

• full length (to end of bare wire): 11 and 3/4 inches
• length of white insulates part of wire: 11 and 1/2 inches

BLACK:

• full length (to end of bare wire): 11 and 3/4 inches
• length of white insulates part of wire: 11 and 1/2 inches

===

Features:

• Polysol-coated magnet wire
• Staggered pole pieces for balanced output
• Alnico 5 magnets for more focus and dynamics
• Overwound bridge pickup for maximum output
• Vinyl-coated output wire
• Plastic bobbin

==

I took several pictures of this pickup (with the cover on and with the cover off), there are a few close up pictures of the markings on the underside of the pickup, there are a few close-up pictures of the wires, and there is a close-up pictures of the screws & rubber bushings.

Please message me with any questions.  Feel free to ask for more pictures.

NOTE:  There may be a few very minor imperfections that I overlooked.  And - there maybe a few glares that show up in the pictures that aren't visible in person .

===

• Comes from a smoke free and pet free environment.
• Feel free to ask questions.
• Will discount shipping on combined purchases!!

• USA Shipping is with USPS (with tracking).  
• International Shipping is with First Class Mail International (with tracking).

CA Prop 65 Warning!
Everything sold into the state of California contains agents known to the state of California to cause cancer and birth defects, reproductive harm, or other, as yet unnamed, harm to its citizenry.