Due to high demand, a delay in the delivery time may appear. Everything is made by hand so a lot of time is involved in each design & build.

Analog VU Meter Audio Visualiser Warm & Ice Blue Display dB Meters STEREO Vintage Look with Blue Led bar on top of the display.

Front headphone Input / Output & volume post-fader level 3.5 Inch jack monitor female connector.
Using the same connector as input can be used as well from a different source like an AUX input.
Is a direct input sensitive, enough to react with your headphone membrane sound vibrations? This means that you can use it as a microphone stereo input from the front. You can test headphones and level signals with a front 3.5-inchfed jack connector and use the potentiometer to adjust the level which will mirror the RCA output. 
Back RCA connectors can be used for two output splits when the signal is fed from the front 3.5 Jack connector. Potentiometer attenuation will be reflected in PFL input and output at the same time.

A great classic VU meter monitor for the audio-video preamplifier and signal levels. Recording professionals, in the studio or reproduction systems, can be upgraded with the classic analog VU meter.

More...

â—‰ Size: W: 20cm X L: 17.8cm X H:7.2 cm | W: 7.8 Inch X L: 7 Inch X H: 2.8 Inch
â—‰ One of the largest displays available.
â—‰ RMS Measurement (Root Mean Square).
â—‰ Mechanic Calibration front and ultra-fine 10-turn potentiometers from backplate / Left / Right Channels
â—‰ RCA Input Output (Gold Plated ) marked Red / Black
â—‰ 3.5 IN / OUT front connector with 10K Alps Japan potentiometer.
â—‰ Post-fader10-turn Input and front output.
â—‰ Input Voltage 12V 1A Recommended.
Post-fader
â—‰ Gold Plated connectors.
â—‰ Warm Incandescent bulb Light and Ice Blue LED bar above meters as a second light for a different mood.
â—‰ Outside adjustment holes for accessing the mechanical panel calibration.
â—‰ Front Headphone Output for 3.5mm Stereo Jack controls Input / Output volume and overall headphones Level according to the signal.
â—‰ *Signal Through System (Means that input and output are connected and the VU circuit is fed, in parallel) With VU ON or OFF the signal will pass / bypass
â—‰ Made by hand with care, expertise craft in the UK
â—‰ Boutique Style & Limited Availability
â—‰ Free Shipping UK
â—‰ We split the international shipping cost with you for a tracked package. You pay Standard we ship it insured and tracked and pay the difference anywhere in the known world.

A regular 12V DC is required from around 500mA min. 12 V Power supply not calculated and not provided. A standard 12 V power supply will be great.
Polarity Center + | - Sleeve Negative
*Signal Through System refers to a continuous path between input and output giving the option to link the VU in series in any position you want before the amplifier. In this way, you can pass the stereo audio signal through the VU Meters and with another pair of RCA continue the signal to the amplifier or audio system input/output. Basically, input and output are connected and a part of the signal is triggering the meter.

You can experiment without damaging it.

A beautiful Vintage Warm color can give you a mood in the room to listen to some music. If you prefer the ice blue color you have the option from the back switch.
Please remember. The signal from an amplifier will be too much. These meters have the role to monitor up to +3 Db RMS.

It is not intended to measure the power of an amplifier. It is not intended to be taken as a precision measurement instrument but is very accurate. It measures the RMS Level. Very low resistance in the signal path. Each channel can be adjusted from outside with a 10-turn potentiumeter screw that gives you a fine adjustment.
Music lovers or signal monitoring professionals. This is the real thing. In

â—‰ A video preview is provided.
â—‰ Back connectors are more apart than the one from the listing.
â—‰ The front potentiometer knob can be different but as a choice.

Get it, love it, or return it. When is gone is gone.


Please check the demo video.
------------------------------------------------------------------------------------

â—‰  Please ask us for Pro XLR Version |  RCA Input / Output if interested. 2 Stereo Inputs and Two Outputs.
1 XLR INPUT 1 XLR OUTPUT | 1RCA INPUT 1 RCA OUTPUT
(Price range Â£ 280 Sold Direct by offer)



This item is sold As-Described

This item is sold As-Described and cannot be returned unless it arrives in a condition different from how it was described or photographed. Items must be returned in original, as-shipped condition with all original packaging.Learn More.

Promoted similar listings













ConditionBrand New (New)
Brand New items are sold by an authorized dealer or original builder and include all original packaging.Learn more
Brand
  • Waves Sounds
Model
  • Warm
Finish
  • Black
Year
  • 2024
Made In
  • United Kingdom

Product safety information may be available here.

Fly High Waves Sounds

Ellesmere Port, United Kingdom
Joined Reverb:2017

Reverb Protection

Simple Returns, Secure Transactions, Human Support

Learn more

Secure Checkout

Reverb Gives

Your purchases help youth music programs get the gear they need to make music.

Oops, looks like you forgot something. Please check the fields highlighted in red.