L Guitar Glide PRO Tremolo Bridge with Claw Lock Resonator

Glide Pro Tremolo Bridge by L-Guitar

   Thank you for your consideration of the L-Guitar™, Glide Pro Tremolo™ System. This is a patent applied for tremolo guitar bridge that features a unique mounting method which provides significantly improved freedom of motion while maintaining a classic vintage styling. This new design was intentionally biased on the vintage tremolo bridge systems which employ 6 mounting screws; therefore, allowing the Glide Pro System to be interchangeable with any of them.

  The issue inherent will all such 6-point vintage tremolo systems is that the mounting holes are machined flat; without a countersink; and the mounting screws themselves have flat bottom heads; i.e. a flat surface on a flat surface, which is not conducive for the rocking movements required in the operation of a tremolo bridge.

   The simple solution was to counter sink the 6 mounting holes on bridge face plate and mount to guitar with ball head screws. That method creates a ball joint type mounting mechanism which significantly improves the tremolo systems freedom of movement.

   The result is that the Glide Pro tremolo bridge stays in tune better, the bridge face plate maintains consistent contact with the ball head mounting screws; which improves instrument tone and sustain. The increased glide of tremolo movement provides guitarist with greater sensitivity and precision articulation.

   The Glide Pro tremolo bridge is available in 3 mounting configuration, Fender™ modern spacing, Kluson™ modern spacing, and Fender/Kluson vintage spacing. The different sizes allow for retro fitting the Glide Pro to almost any guitar with a spring cavity type tremolo system of a vintage styling.

  The face plate of the Glide Pro is fabricated from solid aluminum and the bridge blocks are fabricated in solid aluminum or solid brass.

Measurements: mounting hole spacing for the three bridge types are:

Type:                               Space between mounting holes                 Space between holes 1 & 6

Fender Modern                 0.4090   or   13/32”                                     2.0450  or  2  3/64”

Kluson Modern                 0.4210     or27/64”                                     2.1050or  2  7/64”

Vintage Fender/Kluson   0.      

Weight with aluminum bridge block 5.4 oz.

Weight with brass bridge block 12.6 oz.

This assemble includes the L-Guitar the Claw Lock Resonator with aluminum resonator plate.                 

L-Guitar thanks you for reviewing the Glide PRO tremolo system.