Voce Spin rotary speaker emulator

Voce Spin Rotating Speaker Simulator, Mark 1. 

Half rack Leslie simulator, works great with guitar.  Controls for volume, overdrive, low/high rotor balance, fast/slow rotor speed switch, bypass switch, brake switch, and aftertouch switch, which allows you to control fast/slow rotor speed using MIDI aftertouch. 15 presets for different rotary and chorus sounds, that can also be selected via MIDI. Stereo inputs and outputs, plus a high-impedance guitar input. 

Technically in very good shape, everything works as it should, although one cap for the front buttons is missing (on one the plastic is also a bit broken off) and the chassis has a few scratches from taking the unit in and out of racks. All switches work fine and I always used a foot controller to switch between fast and slow rotation, so it's not really necessary to switch by hand.

INTRODUCTION (from Voce website)

Spin is a fully MIDI-implemented, specialized sound processor in a half-rack package. It accurately duplicates the effect of a rotating speaker cabinet "miked" with four microphones (stereo upper and stereo lower).

SPIN's rotating speaker effect is a double-rotor type simulation. There is an 800 Hz frequency crossover that routes the input signal's high-frequency components to a three-delay rotor simulation and the low-frequency components to an identical three-delay rotor simulation. The two stereo sets of rotor signals are recombined and sent to the audio outputs. Spin's three delays per rotor make for a "fat" and realistic simulated rotating speaker sound. Front panel controlled overdrive provides highly authentic tube-like distortion which is important for this type of sound. It is more of a cab sim though.

Spin has a low-level high-impedance guitar input. The rotating speaker effect is not only a favorite of organists, but also guitarists and studio producers.

Spin is easy to use. 15 presets run the gamut of rotating speaker effects. Virtually every usable rotating speaker setup is represented. Some of the presets included are the "Memphis" sound in which the lower drum's slow motor is unplugged, various mike placements, and various speed compliments.

Foot-switch inputs are provided for both Brake and Fast / Slow rotor control. Another useful feature is the ability to use MIDI aftertouch to toggle the rotors' speeds. MIDI continuous controllers can be used to tweak rotor speeds and accelerations.

SPECIFICATIONS

• Single space half rack module: 8"x8"x1.5", 4 lbs, rack-tray mountable
• Effects: Overdrive, various rotating speaker and chorus effects
• Controls: Input Gain, Overdrive Mix, Rotor Balance, Bypass, Aftertouch, rotor speed controls (Brake, Slow, and Fast), Power on / off, MIDI Channel, Preset selector
• Foot-switch Inputs: Brake, Slow/Fast
• 15 presets: selectable via MIDI covering many popular rotating speaker setups.
• MIDI In/Thru: Controls for rotor speed and preset selection, Continuous controllers to adjust MIDI volume, rotor rates, and microphone placement
• Guitar Input: low-level high-impedance input is provided on the front panel for easy access.
• Stereo audio input and outputs: line-level 1/4" connectors

12V AC power adapter included.

No returns.