Liverpool, United Kingdom
About this listing
AEA R88A Phantom-Powered version of the R88mk2 Stereo Ribbon Microphone - New Product
The active AEA R88A mic retains the same sonic character of the R88, but with an additional 12dB of output and a stable impedance. ideal preamp, AEA offers the Active R88A, a premium version of the R88 complete with JFET electronics and the same custom transformer used in our active R44. It’s basically an R88 with a built-in preamp. This gives a consistent frequency response and greater flexibility with different preamps, including those found in audio interfaces for personal computers. This is great for on-the-road musicians who might have to use a different preamp each night.
The extra 12db of output is vital when recording quiet sources like vocals or soft acoustic guitars. The active circuitry also prevents noise interference on long cable runs or when operating near large lighting rigs. The R88A’s active circuitry requires standard 48-volt phantom power to operate. The premium R88A is visually distinguished by a red cable at its base.
The R88 and R88A are almost identical in sound. The R88A is an R88, but equipped with custom-made Lehle transformer and active electronics. Though the two versions of the microphone sound very similar and both deliver the classic ribbon sound, they have different requirements. The choice between the R88 and R88A is contingent on the specific needs of an engineer and their environment.
AEA R88A Specifications
Operating Principle: Pressure gradient transducer
Directional Pattern: Bidirectional
Frequency Range: < 20 Hz to 20 kHz
Maximum SPL: 165 dB SPL (1% third harmonic > 1 kHz)
Sensitivity: 2.5 mV/Pa (-52 dBV) into unloaded circuit
Output Impedance: 270 Ω broadband
Load Impedance: 1.2 kΩ or greater
Phantom power: Not required or recommended
Polarity: Pin 2 and 4 high for positive pressure at the front of the microphone.
Off Axis Response: Bidirectional
Horizontal: Level changes with angle, frequency response is consistent, -35dB null at 90º / 270º
Vertical: Level changes with angle, reduced HF response above and below 0º / 180º, -25 dB null at 90º / 270º
Transducer Element
Material: Pure aluminum corrugated ribbon
Thickness: 1.8 µm
Width: 0.185 in (4.7 mm)
Length: 2.35 in (59.7 mm)
Accessories Included:Storage/shipping case, swivel adapter, custom protective mic sleeve, user manual
Pricekr.21,131.61
+ kr.271.79 Shipping
kr.226.49 shipping when combined
30-Day Return Policy
Enjoy peace of mind with your new gear
