Three "Collector Grade" Brass Vents by North Coast Music for Early Vox and Marshall Amps

"Collector Grade" Brass Vent For Early Vox AC-4, AC-10, AC-15, AC-30 and Early Marshall Amps - Set of Three - Now offered at a new, lower price as the significant cost of our custom tooling has been fully amortized. Finally, a quality replacement brass vent! Virtually identical to the brass vents originally installed on early Vox or Marshall amps and not the generic Chinese parts sold by many others. Not only are all the outer dimensions, ridges and vent holes identical to the originals, even the exact thickness brass was sourced and used. These vents are 100% US made under the strict supervision of North Coast Music and offer our legendary attention to originality and detail.  We are the only source for our reproductions of the original Vox vents.

 Outer Size: ~ 4 3/4" x ~ 9/16."
The vent slot in the cabinet needs to be: ~4 3/8” to ~4 1/2” by ~3/8” and there should be no 1/8” mounting holes at the end of each vent slot.

Amps originally equipped with brass vents will not have 1/8” holes drilled in the cabinet at the end of each vent slot to accept mounting pins. These brass vents will not cover over these mounting holes, and you will be unhappy with the results.

Due to ongoing issues with lost packages and failed deliveries, North Coast Music is currently not accepting orders destined for delivery in Italy, Brazil or Mexico, no exceptions.