Larrivee RS-4 Charcoal Burst 2008'
This is a set-in-neck Les Paul-type electric guitar made by Larrivee , famous for acoustic guitars.
The mahogany body, which is similar to Gibson's, is made with a flame maple top and a deep-joint set-in neck.
Even the Jason Lollar Imperial Humbucker and the Luxe Bumblebee capacitors Electronics also used fairly expensive components.
Original hard case and warranty card included.
WOODS
Core Body: South American Mahogany
Top Plate: Extra Thick Flamed Maple
Neck: Single Piece South American Mahogany
Fretboard: Indian Rosewood
Headstock: Indian Rosewood
MEASUREMENTS
Scale Length: 25.5" or 650mm
Upper Bout: 9.875
Waist: 8.125"
Lower Bout: 13"
Body Thickness at Edge: 1.5"
Overall Length: 38.75"
Nut Width: 1 ; 11/16th" or 43mm
Weight: approx. 8 lbs.
TRIM/CONSTRUCTION
Neck Join: Extra Long Mortis ; Tenon, Glued in
Headstock Border: Sterling Silver
Headstock Logo: Mother of Pearl
Fretboard Binding: Ivoroid w/Black Side Dots
Fretboard Inlay: Mother of Pearl ; Abalone V-Block Inlays
Body: Ivoroid with Multi-Strip Purfling
Heelcap: Ivoroid
Pickup Rings: Curved Plastic
Knobs: Speed Knobs
Backplates: Textured Black
Cutouts: Back ; Cutaway
Metal Hardware: Nickel ; Chrome
HARDWARE
Tuners: Schaller M6 Tuners
Pickups: Jason Lollar Imperial Humbucker 2008'
Bridge: Jason Lollar Imperial Humbucker 2008'
Tail: Tonepros T1Z-N Nickel Tail
3-Way-Switch: Switchcraft Short Toggle Switch
End-Pin Jack: Switchcraft Mono Jack w/Short Thread
Potentiometers: CTS Long Shaft 500k Audio Pots
Capacitors (Bridge): Luxe Bumblebee Paper-in-oil (PIO) 0.022mF
Capacitors (Neck): Luxe Bumblebee Paper-in-oil (PIO) 0.015mF
Strap Buttons: Schaller Strap Locks
Truss Rod: Single Action Coated Steel Rod
Truss Rod Adjustment: Mini Spoke-Nut design on Final Fret
This is a set-in-neck Les Paul-type electric guitar made by Larrivee , famous for acoustic guitars.
The mahogany body, which is similar to Gibson's, is made with a flame maple top and a deep-joint set-in neck.
Even the Jason Lollar Imperial Humbucker and the Luxe Bumblebee capacitors Electronics also used fairly expensive components.
Original hard case and warranty card included.
WOODS
Core Body: South American Mahogany
Top Plate: Extra Thick Flamed Maple
Neck: Single Piece South American Mahogany
Fretboard: Indian Rosewood
Headstock: Indian Rosewood
MEASUREMENTS
Scale Length: 25.5" or 650mm
Upper Bout: 9.875
Waist: 8.125"
Lower Bout: 13"
Body Thickness at Edge: 1.5"
Overall Length: 38.75"
Nut Width: 1 ; 11/16th" or 43mm
Weight: approx. 8 lbs.
TRIM/CONSTRUCTION
Neck Join: Extra Long Mortis ; Tenon, Glued in
Headstock Border: Sterling Silver
Headstock Logo: Mother of Pearl
Fretboard Binding: Ivoroid w/Black Side Dots
Fretboard Inlay: Mother of Pearl ; Abalone V-Block Inlays
Body: Ivoroid with Multi-Strip Purfling
Heelcap: Ivoroid
Pickup Rings: Curved Plastic
Knobs: Speed Knobs
Backplates: Textured Black
Cutouts: Back ; Cutaway
Metal Hardware: Nickel ; Chrome
HARDWARE
Tuners: Schaller M6 Tuners
Pickups: Jason Lollar Imperial Humbucker 2008'
Bridge: Jason Lollar Imperial Humbucker 2008'
Tail: Tonepros T1Z-N Nickel Tail
3-Way-Switch: Switchcraft Short Toggle Switch
End-Pin Jack: Switchcraft Mono Jack w/Short Thread
Potentiometers: CTS Long Shaft 500k Audio Pots
Capacitors (Bridge): Luxe Bumblebee Paper-in-oil (PIO) 0.022mF
Capacitors (Neck): Luxe Bumblebee Paper-in-oil (PIO) 0.015mF
Strap Buttons: Schaller Strap Locks
Truss Rod: Single Action Coated Steel Rod
Truss Rod Adjustment: Mini Spoke-Nut design on Final Fret
Listed | 2 years ago |
Condition | Very Good (Used) Very Good items may show a few slight marks or scratches but are fully functional and in overall great shape.Learn more |
Brand | |
Model |
|
Categories | |
Made In |
|
Body Type |
|