Wefve just received a vintage 1967 ES-335TD!
Although the serial number falls within the 1966 range and the pot date is also from 1966, the F-hole size is consistent with models made up to 1967, and the pickguard specifications match those from the second half of 1967. Based on these factors, we have determined that this is a 1967 model.

The body features a maple laminate semi-hollow construction with a mahogany neck and rosewood fingerboard. True to the era, it has a 14-degree headstock angle and a relatively narrow neck with a nut width of approximately 40mm.
It is equipped with two original, numbered PAF pickups, delivering a mellow tone characteristic of semi-acoustic guitars, along with a nice, clear sense of separation.
The tuners, frets, nut, bridge saddles, front pickup escutcheon, and knobs have been replaced.
The pointers on all four knobs are bent and lie flat horizontally.

The finish has developed cracks in a manner typical of vintage instruments, suggesting it is original. There are cracks in the finish at the neck joint, as well as other scratches, dents, chips in the finish, peeling on the back, and tarnish on the metal parts and peeling chrome plating.
Although it is a vintage instrument, practical maintenance such as refretting has been performed, and it is in good playing condition.

* Please note that due to the nature of the product, we are unable to transfer it between stores.
Condition Grade: B+: Some scratches, but no issues for normal use

Serial Number: 841296
Year of Manufacture: 1967
Country of Manufacture: USA
Case: Hard Case (Non-Original)
Weight: 3.67 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; sufficient fret height for playable condition (approximately 50?60% remaining)
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 40.3 mm
Neck thickness near the 1st fret: 20.3 mm
Neck thickness near the 12th fret: 24.7 mm
Scale: 628mm (24.75")
Radius: 305mm (12")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Modifications: Tuners, frets, nut, bridge saddles, front pickup escutcheon, knobs
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
Other: --

* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.

* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase and do not guarantee that the values will be the same when the item arrives.

* This is a one-of-a-kind item, and we are listing it simultaneously on multiple platforms, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.

*** The shipping cost to most countries is included in the listed price ***

All musical instruments we sell have been checked and adjusted for playability. The pictures in the listings are of the actual item so please have a look for an idea of the cosmetic condition. As they are used instruments they may or may not have some scratches or wear to the finish. Please note: Ishibashi will not accept returns or refunds in the case of dents, scratches, or cosmetic wear that were originally detailed either in the pictures or description. Thank you for your understanding.

Condition: Some scratches, dents and marks. If you would like to know more about this specific instrument, or have general questions, please don't hesitate to contact us.

Accessories: Please confirm the picture.

Precautions for electronic instruments that use a power supply

The voltage in Japan is 100 V, it is different from most of other countries, you need confirm the voltage of your country and in some cases you have to get locally an adaptor for converting the voltage before use it in your country.

Please note!
All import duties, customs fees, and procedures are the buyer's responsibility - please be aware of the requirements for your country

We will check the condition of the items that we received order over before shipping it out. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from Monday to Saturday 11:00am until 6:00pm (Tokyo time zone) 6 days a week, closed on Sunday.** Please note that all items for sale on here are also available at our retail stores in Japan. There is a chance that they may sell out in our retail location beforehand. We update our information daily, but there is still a chance this may occur. In this event we will cancel the order and refund any payments received. Thank you for your understanding.

More information please confirm our shop policy.