A used 2017 Hollowbody II Piezo 10Top is in stock!

Body, neck, and fingerboard.
The body is a royal combination of flame maple top and back, mahogany sides and neck. Indian rosewood fingerboard.

Neck Shape
Pattern" neck shape is used for McCarty and other guitars, which is more rounded than Pattern Regular and has a slightly grippy feel.

Pickups
58/15LT pickups are used. LT" stands for Low Turns, aiming to produce a clear and warm tone by reducing the number of coil turns (windings).

The Hollowbody II Piezo comes standard with the PRS/LR Baggs piezo system, allowing you to play acoustic and electric guitar tones with a single instrument. Two output jacks allow the electric and acoustic tones to be output from separate amps or sent to the PA via a DI. A separate blend control can also be used to blend the sound from the 58/15 LT pickup with an acoustic sound and send it out one output.

Condition
There is a ding on the tip of the head and other parts are dull.
The neck, frets, truss rod, and all other playing parts are in good condition.
The neck, frets, truss rod, and other parts of the instrument are in good condition.

Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: 17 247308
Year of manufacture: 2017
Country of manufacture: USA
Case: Hard Case (Genuine)
Accessories: tag, wrench, manual
Weight: 2.62kg
Truss Rod: No problem, rod is set at 60 degrees to the left and right, no problem
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.8mm
Neck thickness near 1st fret: 22.2mm
Neck thickness near 12th fret: 24.3mm
SCALE: 635mm (25")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to be seen in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

*** The shipping cost to most countries is included in the listed price ***

All musical instruments we sell have been checked and adjusted for playability. The pictures in the listings are of the actual item so please have a look for an idea of the cosmetic condition. As they are used instruments they may or may not have some scratches or wear to the finish. Please note: Ishibashi will not accept returns or refunds in the case of dents, scratches, or cosmetic wear that were originally detailed either in the pictures or description. Thank you for your understanding.

Condition: Some scratches, dents and marks. If you would like to know more about this specific instrument, or have general questions, please don't hesitate to contact us.

Accessories: Please confirm the picture.

Precautions for electronic instruments that use a power supply

The voltage in Japan is 100 V, it is different from most of other countries, you need confirm the voltage of your country and in some cases you have to get locally an adaptor for converting the voltage before use it in your country.

Please note!
All import duties, customs fees, and procedures are the buyer's responsibility - please be aware of the requirements for your country

We will check the condition of the items that we received order over before shipping it out. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from Monday to Saturday 11:00am until 6:00pm (Tokyo time zone) 6 days a week, closed on Sunday.** Please note that all items for sale on here are also available at our retail stores in Japan. There is a chance that they may sell out in our retail location beforehand. We update our information daily, but there is still a chance this may occur. In this event we will cancel the order and refund any payments received. Thank you for your understanding.

More information please confirm our shop policy.

Listed5 months ago
ConditionGood (Used)
Good condition items function properly but may exhibit some wear and tear.Learn more
Brand
Model
  • Hollowbody II Piezo 10-Top
Categories
Fretboard Material
  • Rosewood
Neck Construction
  • Set-Neck
Body Type
  • Hollow Body
Series
  • PRS Core
  • PRS 10-Top
Body Shape
  • Double Cutaway
Right / Left Handed
  • Right Handed
Number of Strings
  • 6-String
Neck Material
  • Mahogany
Bridge/Tailpiece Type
  • Wrap-Around
Finish Pattern
  • Sunburst
Model Sub-Family
  • PRS Hollowbody II Piezo
Pickup Configuration
  • HH
Model Family
  • PRS Hollowbody II
Color Family
  • Orange
Top Material
  • Maple
Number of Frets
  • 22

Product safety information may be available here.

ISHIBASHI MUSIC

Chiyoda-ku, Japan
Joined Reverb:2016

Reverb Protection

Simple Returns, Secure Transactions, Human Support

Learn more

Secure Checkout

Promoted similar listings













Product reviews

Reverb Gives

Your purchases help youth music programs get the gear they need to make music.

Oops, looks like you forgot something. Please check the fields highlighted in red.