A used "McCarty 10Top" with rosewood neck made in 2003 is in stock!

McCarty
A pillar of Paul Reed Smith's McCarty series, the McCarty models pay homage to electric guitar great Ted McCarty, embodying the latest PRS discoveries and looking back on a golden age of guitars.

Body, Neck, and Fingerboard
The body is a royal combination of flame maple top and mahogany back. The neck and fingerboard are made of Indian rosewood.

There is no 10-top engraving on the back of the head, but it is determined to be 10-top grade by the MODCAT code in the cavity.

Neck Shape
Wide Fat" neck shape is adopted. Neck shape is "Wide Fat" with moderate thickness and good grip.

Pickups
Two "McCarty" pickups are specially designed for this model, and are based on the Dragon pickups, with Alnico 4 magnets.

This guitar has been a favorite of guitarists of all genres for many years, and is sure to provide maximum performance in a variety of settings, including live performances, sessions, and recording sessions.

Condition
There are some minor chips on the head end, one ding on the body back, and other minor scratches and dings. Also, the strap pin has been replaced. (The strap side is missing.) The neck, frets, and truss rod have been replaced.

There are no problems with the neck, frets, truss rod, or any other playing-related conditions.
The neck, frets, truss rod, etc. are all in good playing condition, and have been fully adjusted and fretted at our repair center upon arrival.

Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: 3 73216
Year of manufacture: 2003
Country of manufacture: USA
Case: Hard Case (Genuine)
Accessories: None* missing tags
Weight: 3.43kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard: No problem, fretboard height is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.9mm
Neck thickness near 1st fret: 21.9mm
Neck thickness near 12th fret: 24.9mm
SCALE: 635mm (25")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, switch correction

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to be seen in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

*** The shipping cost to most countries is included in the listed price ***

All musical instruments we sell have been checked and adjusted for playability. The pictures in the listings are of the actual item so please have a look for an idea of the cosmetic condition. As they are used instruments they may or may not have some scratches or wear to the finish. Please note: Ishibashi will not accept returns or refunds in the case of dents, scratches, or cosmetic wear that were originally detailed either in the pictures or description. Thank you for your understanding.

Condition: Some scratches, dents and marks. If you would like to know more about this specific instrument, or have general questions, please don't hesitate to contact us.

Accessories: Please confirm the picture.

Precautions for electronic instruments that use a power supply

The voltage in Japan is 100 V, it is different from most of other countries, you need confirm the voltage of your country and in some cases you have to get locally an adaptor for converting the voltage before use it in your country.

Please note!
All import duties, customs fees, and procedures are the buyer's responsibility - please be aware of the requirements for your country

We will check the condition of the items that we received order over before shipping it out. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from Monday to Saturday 11:00am until 6:00pm (Tokyo time zone) 6 days a week, closed on Sunday.** Please note that all items for sale on here are also available at our retail stores in Japan. There is a chance that they may sell out in our retail location beforehand. We update our information daily, but there is still a chance this may occur. In this event we will cancel the order and refund any payments received. Thank you for your understanding.

More information please confirm our shop policy.