Rare hardtail spec 70s Strat is now in stock!
Ash body and maple one-piece neck with hardtail (back-through) specification without tremolo mechanism.
The PU is the original flat pole piece with 3 gray bobbins, the PU selector is also the original 3-point type, and the other electrical components are also original.
Neck Date: 903 3764
PU Date: (F)121876/(M)121876/(R)241776
POT Date: 13707606 x 3
Fret and nut have been replaced, and both body and neck have been oversprayed.
There are cracks in the paint around the neck joint and inside the left and right horns. There are also some dents on the inside of the horns.
There are also some minor scratches, dents, and paint fading consistent with the age of the instrument.
The pickguard has been replaced.
Item Rank: B+: Some scratches, but no problems in normal use.
Serial number: 76 69702
Year of manufacture: 1976
Country of manufacture: U.S.A.
Case: Non-authentic hard case
Weight: 4.23kg
Truss Rod: Note that the rod has been loosened and cut off, but there is no problem with the neck.
Fret Depth: No problem, sufficient fret height.
String Height: 2.0mm above the 12th fret on the bass string side
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.41mm
Neck thickness near 1st fret: 20.77mm
Neck thickness near 12th fret: 23.42mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing
* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
Specs
Product Rank
B+: Some scratches, but no problem in normal use.
12 months old
Serial No.
76 69702
Year of manufacture
1976
Country of manufacture
U.S.A.
Case
Non-genuine hard case
Weight
4.23kg
Truss Rod
Note: There is no problem with the neck at present due to the rod being loosened and cut off.
Remaining frets
No problem, sufficient fret height
String Height Low String Side
2.0mm above the 12th fret
String height on treble string side
1.5mm above the 12th fret
Nut width
41.41mm
Neck thickness near 1st fret
20.77mm
Neck thickness near 12th fret
23.42mm
Scale
648mm (25.5")
RADIUS
184mm (7.25")
Strings for setup
ERNIE BALL 2223 / .009-.042 set
Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing
*** The shipping cost to most countries is included in the listed price ***
All musical instruments we sell have been checked and adjusted for playability. The pictures in the listings are of the actual item so please have a look for an idea of the cosmetic condition. As they are used instruments they may or may not have some scratches or wear to the finish. Please note: Ishibashi will not accept returns or refunds in the case of dents, scratches, or cosmetic wear that were originally detailed either in the pictures or description. Thank you for your understanding.
Condition: Some scratches, dents and marks. If you would like to know more about this specific instrument, or have general questions, please don't hesitate to contact us.
Accessories: Please confirm the picture.
Precautions for electronic instruments that use a power supply
The voltage in Japan is 100 V, it is different from most of other countries, you need confirm the voltage of your country and in some cases you have to get locally an adaptor for converting the voltage before use it in your country.
Please note!We will check the condition of the items that we received order over before shipping it out. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from Monday to Saturday 11:00am until 6:00pm (Tokyo time zone) 6 days a week, closed on Sunday.** Please note that all items for sale on here are also available at our retail stores in Japan. There is a chance that they may sell out in our retail location beforehand. We update our information daily, but there is still a chance this may occur. In this event we will cancel the order and refund any payments received. Thank you for your understanding.
More information please confirm our shop policy.
Ash body and maple one-piece neck with hardtail (back-through) specification without tremolo mechanism.
The PU is the original flat pole piece with 3 gray bobbins, the PU selector is also the original 3-point type, and the other electrical components are also original.
Neck Date: 903 3764
PU Date: (F)121876/(M)121876/(R)241776
POT Date: 13707606 x 3
Fret and nut have been replaced, and both body and neck have been oversprayed.
There are cracks in the paint around the neck joint and inside the left and right horns. There are also some dents on the inside of the horns.
There are also some minor scratches, dents, and paint fading consistent with the age of the instrument.
The pickguard has been replaced.
Item Rank: B+: Some scratches, but no problems in normal use.
Serial number: 76 69702
Year of manufacture: 1976
Country of manufacture: U.S.A.
Case: Non-authentic hard case
Weight: 4.23kg
Truss Rod: Note that the rod has been loosened and cut off, but there is no problem with the neck.
Fret Depth: No problem, sufficient fret height.
String Height: 2.0mm above the 12th fret on the bass string side
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.41mm
Neck thickness near 1st fret: 20.77mm
Neck thickness near 12th fret: 23.42mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing
* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
Specs
Product Rank
B+: Some scratches, but no problem in normal use.
12 months old
Serial No.
76 69702
Year of manufacture
1976
Country of manufacture
U.S.A.
Case
Non-genuine hard case
Weight
4.23kg
Truss Rod
Note: There is no problem with the neck at present due to the rod being loosened and cut off.
Remaining frets
No problem, sufficient fret height
String Height Low String Side
2.0mm above the 12th fret
String height on treble string side
1.5mm above the 12th fret
Nut width
41.41mm
Neck thickness near 1st fret
20.77mm
Neck thickness near 12th fret
23.42mm
Scale
648mm (25.5")
RADIUS
184mm (7.25")
Strings for setup
ERNIE BALL 2223 / .009-.042 set
Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing
*** The shipping cost to most countries is included in the listed price ***
All musical instruments we sell have been checked and adjusted for playability. The pictures in the listings are of the actual item so please have a look for an idea of the cosmetic condition. As they are used instruments they may or may not have some scratches or wear to the finish. Please note: Ishibashi will not accept returns or refunds in the case of dents, scratches, or cosmetic wear that were originally detailed either in the pictures or description. Thank you for your understanding.
Condition: Some scratches, dents and marks. If you would like to know more about this specific instrument, or have general questions, please don't hesitate to contact us.
Accessories: Please confirm the picture.
Precautions for electronic instruments that use a power supply
The voltage in Japan is 100 V, it is different from most of other countries, you need confirm the voltage of your country and in some cases you have to get locally an adaptor for converting the voltage before use it in your country.
Please note!We will check the condition of the items that we received order over before shipping it out. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from Monday to Saturday 11:00am until 6:00pm (Tokyo time zone) 6 days a week, closed on Sunday.** Please note that all items for sale on here are also available at our retail stores in Japan. There is a chance that they may sell out in our retail location beforehand. We update our information daily, but there is still a chance this may occur. In this event we will cancel the order and refund any payments received. Thank you for your understanding.
More information please confirm our shop policy.
| Listed | a year ago |
|---|---|
| Condition | Very Good (Used) Very Good items may show a few slight marks or scratches but are fully functional and in overall great shape.Learn more |
| Brand | |
| Model |
|
| Finish |
|
| Categories | |
| Year |
|
| Series | |
| Color Family |
|
| Pickup Configuration |
|
| Right / Left Handed |
|
| Fretboard Material |
|
| Body Shape |
|
| Number of Strings |
|
| Neck Material |
|
| Offset Body |
|
| Finish Pattern |
|
| Finish Style |
|
| Body Type |
|
| Body Material |
|
| Model Family | |
| Bridge/Tailpiece Type |
|
| Scale Length |
|
| Neck Construction |
|
| Number of Frets |
|
Product safety information may be available here.
![FENDER USA 1976 Stratocaster Hardtail Sunburst [SN 76 69702] [07/07] image 1](https://rvb-img.reverb.com/i/s--sd-ZaiW1--/quality=medium-low,height=800,width=800,fit=contain/p96atwghnkb1krddmsii.jpg)
![FENDER USA 1976 Stratocaster Hardtail Sunburst [SN 76 69702] [07/07] image 1](https://rvb-img.reverb.com/i/s--heiplMDS--/quality=medium-low,height=400,width=400,fit=cover,gravity=bottom/p96atwghnkb1krddmsii.jpg)
![FENDER USA 1976 Stratocaster Hardtail Sunburst [SN 76 69702] [07/07] image 2](https://rvb-img.reverb.com/i/s--umw7KVPj--/quality=medium-low,height=400,width=400,fit=cover,gravity=bottom/k84mtlsg30t1jbalziku.jpg)
![FENDER USA 1976 Stratocaster Hardtail Sunburst [SN 76 69702] [07/07] image 3](https://rvb-img.reverb.com/i/s--VGwVkV4m--/quality=medium-low,height=400,width=400,fit=cover,gravity=bottom/ref8cpztmnixxep9lhj8.jpg)
![FENDER USA 1976 Stratocaster Hardtail Sunburst [SN 76 69702] [07/07] image 4](https://rvb-img.reverb.com/i/s--ZSoxNIFs--/quality=medium-low,height=400,width=400,fit=cover,gravity=bottom/s8gtvbdlhn8rwia4bb9h.jpg)
![FENDER USA 1976 Stratocaster Hardtail Sunburst [SN 76 69702] [07/07] image 5](https://rvb-img.reverb.com/i/s--dfktdSkh--/quality=medium-low,height=400,width=400,fit=cover,gravity=bottom/ybuh9empxmuwspwlezei.jpg)
![FENDER USA 1976 Stratocaster Hardtail Sunburst [SN 76 69702] [07/07] image 6](https://rvb-img.reverb.com/i/s--KiwQFpNR--/quality=medium-low,height=400,width=400,fit=cover,gravity=bottom/mmw27fbf3vhddznau8k3.jpg)
![FENDER USA 1976 Stratocaster Hardtail Sunburst [SN 76 69702] [07/07] image 7](https://rvb-img.reverb.com/i/s--fxuhPyFD--/quality=medium-low,height=400,width=400,fit=cover,gravity=bottom/k7grevtbjjcrga6r0rky.jpg)
![FENDER USA 1976 Stratocaster Hardtail Sunburst [SN 76 69702] [07/07] image 8](https://rvb-img.reverb.com/i/s--WkV_xDZP--/quality=medium-low,height=400,width=400,fit=cover,gravity=bottom/djlhnttclwzzm3cbpb48.jpg)
![FENDER USA 1976 Stratocaster Hardtail Sunburst [SN 76 69702] [07/07] image 9](https://rvb-img.reverb.com/i/s--iDIoShHI--/quality=medium-low,height=400,width=400,fit=cover,gravity=bottom/mpzhfqjairfk3jjfxv9i.jpg)
![FENDER USA 1976 Stratocaster Hardtail Sunburst [SN 76 69702] [07/07] image 10](https://rvb-img.reverb.com/i/s--7JDDIQHH--/quality=medium-low,height=400,width=400,fit=cover,gravity=bottom/eqcne9jbujagianiqv2r.jpg)
![FENDER USA 1976 Stratocaster Hardtail Sunburst [SN 76 69702] [07/07] image 11](https://rvb-img.reverb.com/i/s--eE9A0Jns--/quality=medium-low,height=400,width=400,fit=cover,gravity=bottom/ikfhrljoivxmogwlu2er.jpg)
![FENDER USA 1976 Stratocaster Hardtail Sunburst [SN 76 69702] [07/07] image 12](https://rvb-img.reverb.com/i/s--961XXqFO--/quality=medium-low,height=400,width=400,fit=cover,gravity=bottom/xianyqjk0lgvfmag1abe.jpg)
![FENDER USA 1976 Stratocaster Hardtail Sunburst [SN 76 69702] [07/07] image 13](https://rvb-img.reverb.com/i/s--UmmdMtYh--/quality=medium-low,height=400,width=400,fit=cover,gravity=bottom/yfyqyt3u0cw1ps15fpn8.jpg)
![FENDER USA 1976 Stratocaster Hardtail Sunburst [SN 76 69702] [07/07] image 14](https://rvb-img.reverb.com/i/s--nFDRGtYv--/quality=medium-low,height=400,width=400,fit=cover,gravity=bottom/bwpb1bgm33h1qapnfwei.jpg)
![FENDER USA 1976 Stratocaster Hardtail Sunburst [SN 76 69702] [07/07] image 15](https://rvb-img.reverb.com/i/s--52_5AVuq--/quality=medium-low,height=400,width=400,fit=cover,gravity=bottom/eylxyijtwimljqth9pxb.jpg)

