Dorval, Canadá
Información sobre este anuncio
Shipping Policy: Please note that we currently ship within Canada only. Offers and orders from outside Canada will not be accepted.
An NT1 with XLR and USB for Recording, Podcasting, and Streaming
Featuring both an analog XLR connector and a digital USB-C connector, the silver Rode NT1 5th Generation represents another major leap forward for this highly regarded large-diaphragm workhorse microphone. The dual connection options offer a new level of flexibility, allowing users without an audio interface to plug directly into the computer for recording, podcasting, and streaming duties courtesy of the onboard 32-bit floating point A to D converter. Of course, if you have an audio interface, podcasting station, or favorite microphone preamp, no problem—just connect the mic's XLR output to your analog equipment and you're good to go. Combining a true-condenser capsule, ultralow-noise circuitry, and an extremely durable housing, the Rode NT1 5th Generation large-diaphragm cardioid microphone is well suited for high-resolution digital recording of vocal and instrument sources at home, in the studio, or even onstage.
Internally Shockmounted HF6 Cardioid Condenser Capsule
Behind the protective mesh grille, the mic features Rode's 1" gold-sputtered HF6 capsule, designed to provide a detailed midrange response with smooth highs and warm bass.
The cardioid polar pattern focuses audio capture on the souce in front of the mic, picking up less unwanted ambient sound from the back and sides.
The transducer itself is suspended inside the microphone using Rycote's industry-leading Lyre system, minimizing external vibrations at the capsule level. The capsule is then married to high-grade electronics that have been designed to provide an extremely low noise level. The NT1 5th Gen is an incredibly quiet microphone, measuring only 4 dBA of self-noise.
The mic is powered by phantom power through the XLR connector or by bus power through the USB-C port.
Revolution Preamp and 32-Bit Floating Point Converters
Rode has equipped the digital side of the NT1 5th Gen with some innovative features to ensure you get outstanding audio quality from the USB connection, beginning with the built-in Revolution preamp which provides plenty of ultralow-noise gain to feed the analog to digital converter.
With its 32-bit floating point A to D converter, you'll never need to worry about clipping again. The converter supplies supplies such a high headroom and wide dynamic range that its virtually impossible to overload, allowing you to worry less about maintaining perfect recording levels and focus more on your creative work.
Sampling rates of up to 192 kHz are supported.
Control Your Audio and Customize Your Sound
Rode's included software allows you to customize the NT1 5th Gen's sound signature to suit your voice with advanced APHEX processing, including the legendary Aural Exciter and Big Bottom.
Remove background noise and make your audio sound smooth, detailed, and punchy, with a compressor, noise gate, and high-pass filter.
Fine-tune to perfection with granular control over every processor, just like professional audio mixing software.
All audio processing is managed by the powerful DSP chip inside the microphone, which takes a load off your CPU.
The software makes it easy to connect and mix multiple USB microphones and sources at the same time, allowing you to podcast and stream without a dedicated audio interface.
Bundled Accessories
The NT1 5th Generation is supplied with the SM6, a high-quality suspension shockmount that provides isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone.
It includes a removable pop shield with two axes of adjustment and a telescopic arm for ultimate application versatility.
The mic also comes with a balanced XLR microphone cable and a USB-C to USB-C cable.
Specifications
Microphone
Primary Applications
Live Sound, Studio Recording
Form Factor
Large Diaphragm Mic / Stand/Boom Mount
Intended Sound Sources
Vocals, Speech/Voice Over, Instrument
Sound Field
Mono
Operating Principle
Pressure Gradient
Capsule
1 x Condenser
Diaphragm
1" / 25.40 mm
Polar Pattern
Cardioid
Orientation
Side Address
Circuitry
Solid-State (JFET)
Pad
None
High-Pass Filter
None
Tone Adjustment
None
Gain Adjustment
None
Indicators
None
On-Board Controls
None
Windscreen
None
Performance
Frequency Range
20 Hz to 20 kHz
Maximum SPL
132 dB SPL
Impedance
100 Ohms
Sensitivity
-29 dBV/Pa at 1 kHz
Output Level
8 mV (Max, 1 kHz)
Dynamic Range
128 dB
Signal-to-Noise Ratio
90 dB A-Weighted
Equivalent Noise Level
4.5 dB A-Weighted
Connectivity
Output Connectors (Analog)
1 x XLR 3-Pin Male (on Mic)
Output Connectors (Digital)
1 x USB-C Female (on Mic)
Headphone Connector
None
Cable Length
19.7' / 6 m
Wireless Connectivity
None
Bluetooth
None
Wi-Fi
None
Digital Audio
A/D Conversion
32-Bit
Sample Rate
Up to 192 kHz
Digital Signal Processing
Compressor, EQ, Noise Reduction, Sound Presets
OS Compatibility
WindowsmacOS*As of January, 2023: Check with manufacturer for the most up-to-date compatibility
Mobile App Compatible
No*As of January, 2023: Check with manufacturer for the most up-to-date compatibility
Power
Bus Power
None
Operating Voltage
24 V (Phantom Power)48 V (Phantom Power)
Physical
Color
Silver
Mounting
Shockmount (Included)
Included Case
None
Included Filters
Pop Filter
Construction Material
Aluminum
Dimensions
ø: 2 x L: 7.5" / ø: 5 x L: 19 cm (Microphone)
Weight
11 oz / 311 g (Microphone)
PrecioC$349
Solo queda 1
Aprovecha antes de que sea demasiado tarde
