Arezzo, Italy
About this listing
The price Is for One piece.Clean & Checked 27.05.2026if you take only one, you'll take the european 240v, #5566, because the other two have sequential serial part. #4030 e #4031 and have 117v tension.The dbx 165A is an upgraded version of the 165 model, featuring the addition of the PeakStop limiting function. All other features are the same as the 165 model. Great on kick, snare, bass, vocals, etc.FeaturesCompression ratio continuously variable from 1:1 to infinity:1In automatic mode, compressor attack and release times are determined by program material dynamics.In manual mode, variable attack and release rates allow the 165A to be used as an ultra-fast or slower rms-detecting limiter.PeakStop circuit prevents unwanted peaks from getting through.Separate detector input allows compression pre-emphasis and other effects.Each 165A is equipped with matched rms detectors for stereo-strapping operation without the signal-summing errors of conventional strapped compressors.Analog rms meter is switchable to read input or output levels or the amount of gain reduction over a 30dB range.Active balanced input for hum and RF rejection.24dBv input/output capability.Specifications:Frequency Response: 20 Hz to 20 kHz +/- 0.5 dBTHD: 0.2%, maximum compression, 1 kHz, 0 dBVNoise: - 90 dBVMaximum Input: + 24 dBVMaximum Output: + 23 dBVInput Impedance: 22k ohm differential, 11k ohm unbalancedOutput Impedance: Low single ended, for driving 600 ohm or greaterGain: - 20 to + 20 dBThreshold Range: - 40 to + 20 dBV (Compressor), - 2 to + 24 dBV (PeakStop)Maximum Compression: Greater than 60 dBAttack TimesAuto: 15 ms for 10 dB, 5 ms for 20 db, 3ms for 30dB;Manual: variable from 2.5 us to 1 ms per dBRelease TimesAuto: 8 ms for 1 dB, 80 ms for 10 dB, 400 ms for 50 dB; (125 dB/s rate);Manual: variable from 250 us to 100 ms per dB
PriceA$2,231.11
+ A$296.91 Shipping
