Guitar edging inlay slot tool T-knife Guitar making tool - (3.5+1.5)
PRODUCT INTRODUCTION :
[Dimensions]: For example, the width (2+1.5) mm milling cutter, the first number 2, represents the width of the milling groove on the panel is 2mm, and can be placed with four 0.5-wide fine decorative lines or one 2mm wide color. Bay, the second number is 1.5, which means the outermost edging width is 1.5mm.
[Special attention]: 1, pay attention to the diameter of the shank is 6.3 mm, the trimmer on the market mostly uses the 6.3 chuck, so this is safe to use. 2, the above model is made according to our experience size, the tool has a long service life, just need to grind, about dozens of piano grinding. The above bearings, if not flexible, can also be easily replaced.
[Dimensions]: For example, the width (2+1.5) mm milling cutter, the first number 2, represents the width of the milling groove on the panel is 2mm, and can be placed with four 0.5-wide fine decorative lines or one 2mm wide color. Bay, the second number is 1.5, which means the outermost edging width is 1.5mm.
[Special attention]: 1, pay attention to the diameter of the shank is 6.3 mm, the trimmer on the market mostly uses the 6.3 chuck, so this is safe to use. 2, the above model is made according to our experience size, the tool has a long service life, just need to grind, about dozens of piano grinding. The above bearings, if not flexible, can also be easily replaced.
Dieser Artikel wird verkauft "wie beschrieben"
Dieser Artikel wird verkauft "wie beschrieben" und kann nicht retourniert werden, es sei denn er kommt anders als beschrieben oder fotografiert an. Artikel müssen im Originalzustand mit allen gelieferten Teilen und Zubehör in ursprünglicher Verpackung zurückgesendet werden.Mehr erfahren
| Zustand | Brandneu (Neu) Brandneue Artikel werden von autorisierten Händlern oder Herstellern verkauft und kommen in originaler Verpackung.Weitere Informationen |
|---|---|
| Marke | |
| Modell |
|
| Kategorien | |
| Hergestellt in |
|
Möglicherweise sind hier Informationen zur Produktsicherheit verfügbar.

