Seven Sound Switching Strat + Working Bridge Tone+Treble Bleed+SRV Pickups + Treble Bleed Circuit + '59 Style Neck with "C" Profile+ Setup+ Leveled, Crowned and Polished Frets+ Kluson Style Vintage Tuners!

Custom Shop Strat:

X-Low Action - Black Ash Seven Sound Switching Strat + Working Bridge Tone+ Treble Bleed+ SRV Pickups + Treble Bleed Circuit + '59 Style Neck with "C" Profile+ Setup+ Leveled, Crowned and Polished Frets+ Kluson Style Vintage Tuners!

This Great Guitar Includes:

Natural Ash 2024 + Treble Bleed Circuit+ Leveled, Crowned and Polished Frets! Very low action with NO BUZZ.

Solid Black Swamp Ash Strat with slim '59 Style "C" profile All Maple Neck + Low Action+ 12" Radius Neck 2024 With New Hardware and Kluson Style Vintage Tuners. The nut width is a standard 1-11/16 and 9-42 gauge strings.

No sharp fret ends from Haywire Custom Shop!

All Fret ends dressed for a softer feel.

Guitar Description:

Classic Strat + 12" Radius Maple Neck with lots of resonance. Completed by Haywire Custom Shop USA-South Carolina. S-S-S and Pearl Guard
 Neck Profile- slim '59 "C" Profile with Jumbo frets

The All Maple Neck is a very most popular neck profile, very similar to Gibson necks. Its slim '59 "C" shape will feel comfortable to most players.
This Classic Strat :

Includes all NEW: Hardware, New set of 3 Noiseless SRV Pickups + Pearl Guard, New Kluson Style Vintage Tuners, Jack, Knobs + New electronics, Neck plate and Strap Knobs and Screws new.

  USA-Custom Shop 7-Sound Stratocaster Switch Translation:

NORMAL Position 1 of the 5-way selector switch activates the bridge pickup alone by engaging the toggle switch at this point it will activate the neck pickup giving you the bridge and neck pickups together.

Likewise, with the 5-way selector switch in the second position with the bridge and middle pickups activated, a flick of the toggle switch adds the neck pickup to the equation which gives you ALL of the pickups together. Two choices now missing on a stock Strat.
5-way switch pickup selections PLUS Your 2 new selections:
The quick Run-Down: Here's what you'll get after we added the 7 Sound Toggle Switch between the Volume and Tone Controls:
(Toggle ON for the first two selections as follows:)
Toggle ON Position 1-Will give you tones and sounds reminiscent of the "Byrds” Rickenbacker tone.

Toggle ON Position 2-Will make all three pickups available at one time.
(Toggle off for following normal switch controls as follows:)                                                              
position 1 Bridge pickup alone bridge + neck in parallel  
position 2 bridge + middle pickup in parallel all three pickups in parallel
position 3 middle pickup alone
position 4 middle + neck pickup in parallel
position 5 neck pickup alone

                                                               
Comfortable familiar neck feel:                                                      

A good neck feel for a player enables and facilitates the following

A Faster playing neck with:

• Improved access and hand comfort
• Smoother note bending
• Easier play with less stress on fingering hand
• Cleaner, sharper notes
• Improved, responsive hand-tapping
• Effortless sweep arpeggios
• Excellent for trills and hammer-ons
• High-Speed pull-offs

 From the Haywire Custom Guitars-Custom Shop

Why is the Treble Bleed Circuit included?

Turning the volume control applies varying amounts of a specially tuned high frequency filter to the pickups.
Now each pickup has the ability to produce a stronger, fuller tone and 50% less noise. This variable treble bleed circuit is pre-installed. The variable treble bleed/bypass circuit corrects the problem of high frequency losses common in Strats and Teles.
It provides auto-adjustment of tone at reduced volumes and improves audio taper between 3 and 10.
Now the tone is crisp, clear and articulate all the way down to 1.

                                                                                 Question?
                                                    With The Treble Bleed modification installed:
                                                                           How does it work?

Answer-It allows you to roll off your volume without losing the highs.
Would you like being able to use the volume control... without sacrificing tone?
Now You Can... with a Treble Bleed Circuit Mod added on this guitar!

As you turn your guitar's volume down, the pot allows some of the current to go to ground as opposed to the output.

The frequencies that leave first are the highs, which leave the tone muddy and obscured without an "edge" on it to a discerning ear.

               So....., you can now avoid this problem with the installed: Haywire Treble Bleed Circuit

          NOW......When you lower your guitar's Volume control take notice if you lose your tone's clarity. 

If your tone is now muddy & with too much bass, adding our Haywire Treble Bleed Circuit to your Volume Control Pot, your guitar will "Bleed" in more Treble as you turn your volume down.  Now you have much cleaner, articulate tones when rolling down the volume control.
 
This feature allows the treble frequencies to be re-introduced into the output for clarity and improved timbre and no loss of highs for you. At Haywire we simply install a TB Circuit capacitor. We build them in our custom guitars for a better Low and High sound spectrum:

1-error-correction of signals with enhanced clarity

2- preserve high end frequencies

3-improved taper when rolling back your volume control

Note: More about this Treble Bleed Circuit Mod on the Haywire Custom Guitars Website
Specifications:

• Body Wood: Solid Swamp Ash

• Finish:  Gloss Black
• Scale Length: 25-1/2" (648mm)
• Neck Pocket Size: 2-3/16" (55.55mm) Width x 3"(76.2mm) Length x 5/8"(15.88mm) Depth
• Neck Mounting Hole Dimension: standard 51mm x 38mm
• Neck mounting holes and wire path are drilled already.
• Routed for HSH pickup configuration, which is able to accept universal pickup settings.
• For Pick-Ups the ohms are: Special Bridge Pickup:
  DC Resistance: 14.10K Special Strat
  DC Resistance: 8K Special Neck Pickup:
  DC Resistance: 7.04K  Middle Pickup   
• Buyers please note: Haywire Custom Guitars offers custom guitars made to their customer's specifications if you have any questions, concerns or special requests then please ask before purchase. We are a Custom Shop featuring many custom options for players. Haywire guitars are made in South Carolina at a reasonable price just for players. We also offer custom guitar neck replacements, installations and custom guitar neck shaving. "Building satisfied players one Haywire Custom guitar at a time!" Great Tone and Sustain with lots of resonance.
• Our electronics, pickguards and pilot holes are added free of charge on used bodies, however if you have any specific electronic requirements, please ask prior to purchase.
• We have our own house brand SRV pickups, but we have access to anything our customers need. We want you to be happy so please let us know exactly what you want before buying.