CVPA PlateMic-RS - Compact Analog Stereo Plate Reverb w/Remote Control & SDS - PREORDER

Introducing the all-new CVPA PlateMic-RS: A compact analog stereo plate reverb with the new Advanced Stepper Remote Control System! Available for pre-order now!

This listing is for the following options:

-Remote damper control (all new digital remote with ethernet connectivity and web control!)

-Internal Stereo Driver System (SDS) (Requires headphone amp to drive it via TRS cable)

-External DC power: Allows for adjustable mic-level -to- +4dBu line-level output (w/10k+ load).

Experience the incredibly lush and dynamic sound of real analog plate reverb in ways not possible with traditional plates: the PlateMic-S features the unique purpose-built ability to sing/play directly to the plate for the most dream-like reverb sound you've ever heard -AND- the new internal Stereo Driver System gives you the ability to drive the plate from any headphone output for the best of both worlds!

The PlateMic-S can add extra stereo dimension, depth, dynamics, and plate resonance to your mix that VST's and digital units fail to deliver; features a huge range of reverb decay time adjustment to dial in anything from a small "room" sound to a massive cathedral!

The ability to push the unit hard into plate distortion is another thing that VST's and digital units can't touch - the new internal Stereo Driver System has built-in diode limiters that you can use to safely over-drive the unit into wild plate distortion if you want!

The PlateMic could be the centerpiece of your studio and a big draw for customers; its impressively beautiful sound will make you excited to perform, mix, and experiment with new ways to maximize its incredible potential!

NEW Audio Demo for the PlateMic-RS:

Be sure to check out the all-new YouTube remote control demo of a PlateMic-RS with Jensen transformers and "Thick" Brass plate option (video at the end of the pics); ask for Google Drive links to high-quality 24-bit samples.

The PlateMic-RS is incredibly versatile and can be used in a wide variety of ways:

-As a wet/dry direct reverb using the speaker pole mount with a "dry" microphone in front.

-As a full-wet direct reverb microphone using the speaker pole mount (great for dreamy background vocals).

-As a room microphone sitting on the floor (great for drums).

-As a traditional post-production reverb using the new internal Stereo Driver System (SDS).

-As a traditional post-production reverb placed in front of your studio monitors as the drivers.

-As a traditional post-production reverb placed in an isolated vocal booth fed with small studio monitors.

-As a "quick and dirty" reverb using headphones placed on the unit acting as drivers.

CVPA PlateMic-RS features, details, and specs:

All-new 7-Segment LED 1U Rackmount/Desktop Remote Control Unit:

-Can be delivered as a 1RU rackmount or desktop config (and you can switch it anytime).

-0.1s display increments for accurate decay time display

-Green +/- LEDs show stepper direction when active/moving.

-6 x User recall buttons (hold 3s to program) and comprehensive menu/config.

-10/100 Mbps+ Ethernet network compatible w/RJ45 connector (can connect to routers/Wifi/etc.).

-Virtually unlimited simultaneous remotes (great for multi-room studios).

(Contact CVPA for quote on custom remote sizes/vertical orientation for consoles, 500-series, Eurorack, etc.)

HTML Web Remote Control:

-Virtually all hardware remote functions duplicated in web remote (except menu/config).

-Compatible with virtually any web browser, OS (Windows/Mac/Linux/etc.), or mobile device.

-Large buttons optimized for easy touchscreen operation on mobile devices.

-0.1s display increments for accurate decay time display/recall.

-Green ◄► Arrows show stepper direction when active/moving.

-6 x User recall buttons (hold 3s to program).

-Web only features: Enter the decay time directly using your numpad. Single-button homing.

-Hardware remotes host (and work with) 1 x active web remote (great for multi-room studios).

-All hardware and active web remotes update simultaneously and quickly via-UDP broadcast.

-Wireless WiFi remote control possible using your mobile device and a WiFi router.

-Wired PC/Mac/Linux remote control over your 10/100+ Mbps Ethernet LAN switch/router.

Low-noise Stepper Motor Remote Control:

-Industrial Japanese SANMOTION stepper motor driven by low-noise German Trinamic TMC2209 driver.

-EMI/EMC filtering for essentially zero audio band & RF interference during stepper operation.

-Stepper motor shuts off instantly after each move for absolutely silent operation.

-Low-noise damper movement allows you to hear reverb decay time changes easily.

-Automatic "sensorless homing" eliminates damper position sensor, limit switch, and DC voltage amp.

-Stepper speed and homing sensitivity adjustable in hardware remote config menu.

-Additional/duplicate decay time buttons on back panel of main unit (with homing and reset features).

-10/100 Mbps+ ethernet network compatibility (RJ45 connector compatible with shielded cables).

Internal Stereo Driver System (SDS):

Allows you to drive the plate using any DAW interface/console/mixer/discrete headphone output! Optionally pair this with an affordable (or high-end) studio headphone amp (not included) and you'll have balanced line-in capability! 1/4" TRS stereo input jack on front panel w/2 x "CLIP" LEDs to monitor if the built-in driver protection diode limiter is active. The SDS was built for easy servicing by a qualified tech; the drivers and all internal components are replaceable.

-Re-designed to withstand the roughest shipping with zero damage to the plate; rest assured your plate will not be damaged easily!

-Low-noise super-high impedance Discrete Class-A JFET/BJT preamps and transformer balanced output; typical noise floor in a quiet environment is around -80dbfs peak/-100dbfs rms A-weight with my CVP-500 vintage NOS Germanium preamps!

-Powered via-24VDC PSU - worldwide voltage compatibility.

-4-position stepped HPF on the front panel for low-freq. control (60/120/240/480hz)

-Expanded L/R gain trim on front panel using 20-turn precision trimpots - allows you to dial in the perfect output level and stereo balance for your preamps (i.e. low output for a clean sound or high output to drive your preamp's input transformers or tubes, etc).

-2 x All-new rotary front panel sound ports allow you to adjust the volume of external sounds to the plate and acts as a low pass/high-cut filter. Solid aluminum knobs and smooth silicone damped operation.

-Front panel ground lift DIP switches for pesky ground hum situations.

-Incredibly tough all-aluminum extrusion-based construction with tough powder coat finish and precision engraved lettering.

-Small and lightweight enclosure can be easily moved and go where larger reverbs can't!

ENGLISH OVERALL DIM/WEIGHT: 28.8in W x 18.5in H x 8.3in D 30lbs

METRIC OVERALL DIM/WEIGHT: 73cm W x 47cm H x 21cm D 13.6kg

Advanced Damper System features:

-Non-resonant damper strips (facing the plate) clear up mid-range muddiness for more clarity.

-Provides frequency-balanced decay time across the entire damper operation range.

-Sounds rich and full; even at low decay times!

-Thick and tough all-aluminum frame; re-designed to withstand the roughest shipping!

-Incredibly smooth silicone-damped operation using precision CNC leadscrew.

Plate descriptions:

Standard Brass (free) - 0.7s - 4.5s @ 500hz - Longest high freq. decay time - Medium resonance

My most recommended plate: works with the most sources and is easiest to mix with. If you are a fan of the EMT 140, the extended high-freq. decay of this plate will get you as close as possible to that classic sound (for a small plate).

Thick Brass (+$100USD) - 0.8s - 7.7s @ 500hz - Medium high freq. decay time - Medium resonance

If you want a "spacey/ambient" reverb sound - this is the plate for you! Warmer than standard brass because of the reduced high-freq. decay (as such, it won't reverberate high freq. instruments as long).

Contact me for other "special-use" plate options available for those that want more "rare/unusual/unique" plate sounds (however I highly recommend Standard Brass for your first plate!).

Options list:

Transformer options:

2 x Edcor (USA) transformers: FREE

2 x Jensen (USA/CAN) transformers: +$120USD total

Speaker Stand Adapter:

-35mm/1-3/8" speaker stand adapter for vocal usage: +$40USD

Plate options:

Standard Brass: FREE

"Thick" Brass: +$100USD

Contact me for other "special-use" plate options available for those that want more "rare/unusual/unique" plate sounds (however I highly recommend Standard Brass for your first plate!).

Payment info: 

CVPA has been a trusted manufacturer and Reverb.com seller for nearly a decade (check out my feedback!), so you can trust that your investment is safe and your pre-order will be manufactured and delivered with the utmost in care and attention to detail not found anywhere else!

Pre-order Terms:

-All deposits/payments are non-refundable.

-All prices are final and can not be renegotiated/changed after first deposit/pre-order.

-Refusal to contact me within 1 year of pre-order will result in forfeiture of all deposits/payments/parts for the unit unless you pay for long-term storage in advance: please contact me anytime if you'd like to designate an alternate/backup contact for your order.

-Refusal to abide by the terms in this listing will result in forfeiture of all deposits/payments/parts for the unit: these terms are final and non-negotiable after pre-order/deposit.

You may request a pre-order status report at any time - I usually respond with 24-hours to any questions you may have!

Shipping info and return policy:
I cannot offer returns on any of my pre-order products- so please consider all PlateMic sales/pre-orders to be final.

Please be sure to ask all questions before purchase - I'd be happy to help!

Worldwide shipping with full insurance at buyer expense - I've shipped high-end vintage pro audio gear to studios and individuals all over the world.

International / Remote Customers:

-$600USD shipping price is a revised "worst-case-scenario" placeholder; for the exact shipping charge, please contact me with a quote - typical shipping prices are always MUCH lower!

PlateMic-S shipping estimates (w/full $4300USD total insurance):

$302.33 to Honolulu, HI

$313.42 to Ottawa, CA

$363.70 to Paris, FR - Berlin, DE - London, UK - Rome, Italy

$394.53 to Tokyo, JP

$446.92 to Madrid, ES - Stockholm, SE - Helsinki, FI - Copenhagen DK - Oslo, NO - Warsaw, PL -

Vienna, AT

$451.33 to Canberra, AU - Wellington, NZ

Shipping estimates for 2 boxes via - UPS Worldwide Expedited or Ground

Main PlateMic-RS box: 31" x 21" x 13" 45lbs w/$3800 insurance and wood sides for protection

Remote/PSU box: 23" x 15" x 7" 9lbs w/$500 insurance

-Please research your import duty & tax costs before purchase using the full purchase price including all options - these charges can be expensive and are non-refundable! This will ship under customs HS Code: 8518.40.2000

Warranty/Guarantee:

I personally run extensive tech/audio tests (to included infrared imaging scans of all components after 24-hour runtime) of all units I build to ensure there are no manufacturing issues. Each unit is shipped with the utmost in care under the assumption that shipping could get rough. I've had very few issues with my products over they years and the few issues encountered have been remedied expediently at my own expense. Larger companies tolerate a certain percentage of defects in their products, have unhelpful/incompetent customer support, and will ship you another brand-new defective product if you have issues: with CVPA you will be able to deal directly with the sole-proprietor/manufacturer/engineer; I will immediately remediate/re-design any significant product flaws I encounter and consider all customer feedback seriously.

I offer a limited warranty for manufacturing defects in all my new products; if anything is faulty from shipping damage or there is a defect from assembly, I will ship replacements parts for free up to $100USD in shipping costs.

International or domestic customers that require shipping greater than $100USD for any defect or shipping damage repairs will need to pay the difference in advance; however the parts and labor for the repairs will be free. I ship will full insurance, so any shipping damage repairs should be paid from your shipping insurance damage claim funds (it is very important to document all damage immediately upon arrival to make your claim).

Customers are solely responsible for damage they cause themselves or by a 3rd party (i.e. accidents like dropping the unit down stairs, etc.), theft/loss, and/or acts of nature/gov; flooding/fire/electric grid or mains issues/war/etc. - however I will do my best to keep the repair costs reasonable.

Audio Hardware and Software Manufacturers:

Contact CVPA about manufacturing licenses, VST Plugin Hardware Emulation licenses, or outright purchase of CVPA designs/intellectual property for your company to manufacture. I have several unique and highly popular product designs refined through nearly a decade of engineering and research that could take your business to the next level and shorten your product development timeline - contact me with preliminary offers!

Feedback policy: I leave feedback after receiving feedback from the buyer.

Thanks for looking!

-Richard, CVPA (Sole-proprietor)

Classic Vintage Pro Audio

Ozark, AL USA

Please note: All pro audio sales through Reverb.com only.