Brand New Sequential Prophet-600 Control Panel w/19 REAL SWITCHES
Only 1 left
Grab it before it's gone
Our users rate Reverb
Completely renew and improve the control panel of your Sequential Prophet-600 with this brand new replacement control panel overlay from Synhouse, with 19 real mechanical switches inside a sandwich assembly based on a flexible PCB with self-stick adhesive laminated to the underside.
You can clearly see the rounded corner square raised areas on the control panel in the photos, and more importantly, you can feel it under your fingers without having to look down at it again and again. This makes for a vastly superior control panel just like the famous "Brand New Moog Source Control Panel w/62 REAL SWITCHES to Replace Membrane Panel!" and no one else has this. A significant investment in tooling was required to do this, this is why they are coming out so slowly and so far apart.
The new Synhouse switch panel looks like the same old Sequential Prophet-600 control panel, but it hides the 19 real snap dome mechanical switches inside. The switch mechanisms are most similar to those in the switches of the E-mu Emulator II, SP1200, etc.. The switches move up and down approximately 2 millimeters. They have positive tactile feedback when pressed, but it is a muted sound with a low thunk, not loud and clicky like a VCR switch.
As with all the Synhouse overlay products, it is manufactured of the highest quality polycarbonate and adhesive with crystal clear printing and brilliant colors.
-----------------------------------------------------------------------
Installation:
No matter how flexible it may seem, DO NOT BEND THE NEW SWITCH PANEL.
BEFORE removing old membrane panel and BEFORE peeling the backing off the rear adhesive of the new one, open the Sequential Prophet-600 and connect the new control panel to the connectors on the Sequential Prophet-600 PCB.
With something flat and solid behind the new one to hold it solidly so you can press the switches and to be sure you don't bend it (like the control panel area of the Sequential Prophet-600 itself, or a hard counter top, etc.), test each switch (powered up with sound) to be sure everything is working perfectly. You can't just squeeze it between your fingers, as you shouldn't press on the underside like that, it's the areas around the switches that support them, pressing from the bottom could damage the substrate or connections.
Once all is confirmed, remove the old one and stick the new one in place WITHOUT BENDING IT!
-----------------------------------------------------------------------------------------------
About Synhouse:
Synhouse Multimedia Corporation (best known as the manufacturer of the world's #1 analog MIDI retrofit, the Synhouse MIDIJACK) has been in business for 24 years and has been manufacturing from day one. Synhouse existed for 4 years informally before incorporation, and was officially incorporated in 1999. Twenty-four years later, those first products (the Synhouse Original MIDIJACK, MIDIJACK II, and Moogiestyle MIDIJACK) are still being manufactured.
This item is sold As-Described
This item is sold As-Described and cannot be returned unless it arrives in a condition different from how it was described or photographed. Items must be returned in original, as-shipped condition with all original packaging.Learn More.
| Condition | Brand New (New) Brand New items are sold by an authorized dealer or original builder and include all original packaging.Learn more |
|---|---|
| Brand | |
| Model |
|
| Categories |
Product safety information may be available here.
