Sonodyne SRP800 8" 2 Way Powered Monitor Speakers Pair SRP 800

Sonodyne SRP800 8" 2 WayPowered Monitor Speakers Pair

OVERVIEW
The SRP 800 is a new high power active reference monitor. This SRP is excellent for loud monitoring without any audible loss in detail. The enclosure is pressure die cast aluminum that maximizes rigidity and lends it a unique form. The silk dome tweeter is nested in a custom waveguide to produce on and off axis linearity and a wide, detailed soundstage. The 8 " kevlar woofer produces deep bass and exceptional transient response. A new 175 + 100 watt biamplifier drives the transducers optimally while providing adequate headroom and dynamics. The maximum SPL measures in at an impressive 112dB. DSP based internal processing with high quality ADC and DAC is employed for the crossover and also provides the 0.75dB step calibrated HF and LF room compensation EQs at the rear. On the front is a level control ranging from mute to +6dB with centre detent at 0dB. Tapped inserts at the rear and bottom allow for various mounting options. The SRP 800 accepts XLR balanced inputs and is available in the following durable powder coat finishes: rich black, charcoal grey or snow white.

SPECIFICATIONS
DESCRIPTION
2 way biamplifier speaker
TRANSDUCER COMPLEMENTS
LF: Magnetically shielded 8" kevlar cone woofer in die-cast chassis
HF: Magnetically shielded 26mm silk dome tweeter with custom waveguide
ENCLOSURE TYPE
Vented, through rear-firing aerodynamic port
ENCLOSURE MATERIAL
Pressure die-cast aluminum
OVERALL FREQ. RESP. (å±2dB)
42Hz ~ 22kHz, (å±2dB)
USABLE FREQ. RANGE (-10dB)
37Hz ~ 25kHz
MAX. LONG TERM SPL, 1/2 SPACE
112dB
HORIZONTAL BEAM WIDTH
104å¡ (averaged b/w 5~16kHz)
VERTICAL BEAM WIDTH
83å¡ (averaged b/w 5~16kHz)
TOTAL HARMONIC DISTORTION (@ 95dB SPL)
80Hz ~ 200Hz < 3%; > 200Hz < 1%
AMP. POWER BEFORE CLIPPING
LF: 150W, HF: 100 W
S/N RATIO (AT UNITY GAIN)
> 90dB, referred to full output
AMP. THD AT RATED POWER
< 0.04%
INPUT:
Fully balanced through XLR & TRS sockets
INPUT LEVEL FOR 90dB SPL @1M
+7dBU
CMRR
>65dB
CROSSOVER FREQ
1.8kHz
GAIN CONTROL RANGE
-70dB ~ +10dB, 0dB at (detented) centre
LOW SHELVING EQ
50Hz ~ 250Hz, -3dB ~ +3dB in 0.75dB steps
HIGH SHELVING EQ
4kHz ~ 20kHz, -3dB ~ +3dB in 0.75dB steps
BASS ROLL-OFF
63Hz, 12dB/ octave
CONTROLS : FRONT
Power Switch and Gain Control
CONTROLS : REAR
Low shelving, High shelving, Bass roll-off
INDICATOR
Power ON/OFF
PROTECTION
Over current, Overheat , RFI, Switch on/ off transients
POWER REQUIREMENT
230VAC, å±10%, 50Hz; 115V optional
POWER CONSUMPTION
345VA Max.
FINISH
Powder coated (G: grey / W: white / B: black)
DIM. (WxHxD) mm
291 x 434 x 280
NET WEIGHT
17kg
INSERTS FOR MOUNTING
4 x M6 inserts on rear, 4 x M6 inserts on bottom
WALL MOUNT BRACKET
SRP WB 3