Janus — Dual-Engine Synthesiser Voice for Eurorack


Janus is not an oscillator. It's a complete synthesiser — two independent engines, twelve kinds of synthesis, a chord engine, a polyphonic arpeggiator, a modulation matrix, preset memory and a full stereo effects chain — all played from one CV and gate.

One pitch CV and one gate go in. What comes out is a part: voiced, played, effected and finished.


No surprise charges: orders to the USA and Germany include pre-paid import taxes and tariffs in the postage, so the price you see is the total you pay. Buyers elsewhere may owe their carrier additional fees depending on local rules.


Hand-built in the United Kingdom. Two-year guarantee, and if it fails in the first six months we replace it rather than repair it.


Two engines, twelve kinds of synthesis

Two engines run at once, independently, each with eight voices and its own filter, envelopes, level and tuning. Set each to whichever synthesis suits the sound:

V-Analogue — two oscillators with sync, sub and unison

FM — six-operator, DX-style, with the full bank

Modal — struck, plucked and bowed resonant bodies

String — Karplus–Strong plucks, bows and blows

Drums — nine tuned drum voices

Tonewheel — a nine-drawbar organ with percussion

Wavetable — morphing wavetables with a position LFO

Phase Dist — CZ-style phase distortion

Additive — partials, tilt, odd/even and comb

Formant — vowel and voice synthesis

Waves — the four classic shapes, done properly

Noise — white and pink through the engine filter

Turn the second engine off and its eight voices go to the first: one engine, sixteen voices, the same effects and the same everything, just all of it pointed at one sound. Switch it back on and you are at eight and eight again, at the same level either way. Nothing to set and no mode to choose — the polyphony follows what you are actually using.

Engine 1 can cross-modulate engine 2 by FM or AM, tapped before its level — so an engine set silent is still a full-scale modulator.

And every engine is loudness-matched to every other by measurement. Switching type is a musical decision again, not a trip to the output knob.

One gate, a whole part

Janus takes a single pitch CV and gate. It holds sixteen voices inside, but they are not sixteen keys — they are what lets a note ring on past the gate, what the chord engine stacks a single trigger into, and what the arpeggiator spreads across time.

The chord engine turns one gate into a voicing — including just-intonation and harmonic stacks — and can advance the chord type on every note, so a plain sequencer track walks a progression. The arpeggiator then takes whatever is held and spreads it, with harmony, strum, pedal-point, ratchets and generative variation. And on the struck engines, notes decay naturally long after the gate has closed.

One sequencer track in. A moving polyphonic part out.

Three knobs that are always the right three

Janus boots into its PLAY screen, and that is where it is meant to live.

Three knobs sit on the sound in front of you, already mapped to the controls that define whichever engine you are on — a wavetable's scan, a modal body's material and strike, an organ's drawbars, an FM voice and its brightness. Nothing to bind, nothing to set up, nothing to remember.

Eight pages carry the rest under the same three knobs: levels, both envelopes, the filter, the effects, the granular section and the engine's pitch placement. The depth is all still there — the matrix, the operator envelopes, the mode tunings — but it sits behind the instrument rather than in front of it.

A studio on board

A full stereo effects chain, all of it on the module: Age for the drift and wear of a well-used instrument, then bitcrusher, filter and drive, phaser, granular, delay, reverb, chorus and glitch. Every effect has its own wet and dry, and every parameter is a modulation destination.

The granular engine

The granular section is the one to go and find first.

It sits in the middle of the chain, after the filter and phaser and before the delay and reverb — so it granulates the whole instrument, both engines together, and the grains then land inside the delay and the reverb rather than being sprinkled over the top of them. Audio runs continuously into a capture buffer, and grains are read back out of it with Hermite interpolation, up to eight overlapping at once.


* Position — where in the buffer the grains are read from: hard right is the audio you just played, hard left is the oldest still held.

* Size and Density — from single isolated grains drifting past with silence between them, to a solid cloud.

* Pitch — ±2 octaves, and Jitter scatters it per grain, so one setting gives a chorus of pitches rather than a transposition.

* Spray — scatters where each grain starts reading, smearing a tight loop into a wash.

* Texture — opens the grain window from a soft Hann curve towards a near-boxcar, which is the difference between a breath and a stutter.

* Random — moves the spawn clock from strictly periodic to Poisson, so the cloud stops sounding machine-timed.

* Grain arpeggio — steps each successive grain up or down by up to an octave over a settable number of steps, turning a held buffer into a figure.

* Freeze — stops the capture. What is in the buffer stays there, and everything above keeps working on it, indefinitely. Play on top of it with the instrument it came out of.

* Fine and Long modes — a short buffer with full bandwidth for stutters and glitches, or a four-times-longer one for pads and drones.


Three of these sit on the knobs on PLAY's own Granular page, and every single parameter is a modulation destination — so Position can be swept by an envelope, Freeze triggered from a gate, Density tracked from a CV input.

Modulation and memory

Four mod sources — LFOs, sample-and-hold, random, envelopes, probabilistic gates and Euclidean patterns — plus two mod envelopes, feeding a sixteen-slot matrix that reaches every parameter in the instrument. Each routing can be aimed at engine 1, engine 2, or both. The two assignable CV inputs can take any parameter over outright as a hands-on control.

Presets store the whole instrument: both engines, the filters, the envelopes, the modulation, the arpeggiator, the chords and every effect. The module keeps its state through power-off exactly as you left it, edited or not.

Specifications


* Two independent digital engines, eight voices each; sixteen voices on a single engine when the other is off

* Twelve synthesis types, all resident and switchable from the panel

* Chord engine with sequencing, just-intonation and harmonic chord types

* Polyphonic arpeggiator with harmony, strum, pedal-point and generative variation

* Four mod sources, two mod envelopes, sixteen-slot modulation matrix with per-routing engine scope

* On-board stereo effects: age, bitcrusher, filter/drive, phaser, granular, delay, reverb, chorus, glitch

* Preset memory with factory and user banks

* Inputs: 1V/oct, gate, two assignable CV

* Outputs: stereo out (L/R), two assignable modulation outs

* Controls: three knobs (A, B and C), DATA encoder, OLED display

* 44.1 kHz

* Format: Eurorack, 10 HP

* Power: +12 V @ 120 mA, −12 V @ 30 mA

* Please note: Janus has no MIDI input. It is played from CV and gate.

Promoted similar listings













ConditionBrand New (New)
Brand New items are sold by an authorized dealer or original builder and include all original packaging.Learn more
Brand
Model
  • Janus – 10HP Polyphonic Multi-Engine Eurorack Synthesizer Module
Categories
Year
  • 2026
Made In
  • United Kingdom
Horizontal Pitch
  • 10HP
Synth Module Function
  • Full Voice Synth
Polyphony
  • 16 Voices
Analog / Digital
  • Digital

Product safety information may be available here.

About the seller

Hampshire Electronics

Ash, United Kingdom
Joined Reverb:2026

Reverb Protection

Simple Returns, Secure Transactions, Human Support

Learn more

Secure Checkout

Reverb Gives

Your purchases help youth music programs get the gear they need to make music.

Oops, looks like you forgot something. Please check the fields highlighted in red.