LOOP-MASTER PEDALS 2-WAY ISOLATED PATCH BAY – DUAL TS/TRS JUNCTION BOX

A simple, ultra-compact way to clean up pedalboard connections and move hard-to-reach cable connections to a convenient location.

The Loop-Master Pedals 2-Way Isolated Patch Bay provides two completely independent 1/4" pass-through channels in a tiny 1590A enclosure.

Best of all, the two channels can be configured independently for TS or TRS connections.

Choose:

• TS + TS

• TRS + TRS

• TS + TRS

• TRS + TS

This makes it useful for far more than just standard mono guitar connections.

No switching. No active electronics. No power required.

Just two clean, independent pass-through connections in an extremely compact box.

WHAT IT DOES

• Two independent 1/4" pass-through channels

• Available with TS and/or TRS connections

• Each channel can be configured independently

• Use both channels as TS

• Use both channels as TRS

• Use one channel as TS and the other as TRS

• Each connection passes straight through

• Channels electrically isolated from one another

• Works in either direction

• Completely passive

• No power required

• Premium jacks

• Ultra-compact 1590A enclosure

• Handcrafted in the USA by Loop-Master Pedals

CHOOSE YOUR CONFIGURATION

Each of the two channels is independent, allowing the patch bay to be configured for your particular pedalboard.

TS + TS

Two standard mono pass-through connections.

Great for:

• Guitar input

• Amp output

• Effects loop send/return

• Mono pedalboard connections

TRS + TRS

Two stereo/TRS pass-through connections.

Great for:

• Stereo/TRS signals

• Expression pedal connections

• TRS amp control

• TRS auxiliary footswitch connections

• Other compatible TRS applications

TS + TRS

One standard mono channel and one TRS channel in the same tiny box.

This is especially useful for pedalboards that need a conventional guitar/audio connection alongside a TRS control, expression or stereo connection.

TWO COMPLETELY INDEPENDENT CHANNELS

CHANNEL 1

Jack 1A ↔ Jack 1B

CHANNEL 2

Jack 2A ↔ Jack 2B

The two channels are independently wired.

There is no signal routing or switching between Channel 1 and Channel 2.

PERFECT FOR PEDALBOARDS

Mount the patch bay at the edge of your pedalboard and move connections that would otherwise be buried underneath or between pedals to an easy-to-reach location.

Use it for connections such as:

• Guitar input

• Amplifier output

• Effects loop send

• Effects loop return

• Stereo signals

• Expression pedals

• TRS amp switching

• External auxiliary footswitches

• Pedalboard input/output

• Rack connections

• Studio connections

• Other TS or TRS connections

MIX TS AND TRS IN ONE BOX

This is where the 2-Way Isolated Patcher becomes especially useful.

You don't have to dedicate the entire box to one connection type.

For example:

CHANNEL 1 – TS

Guitar Input

CHANNEL 2 – TRS

Amp Footswitch Control

Or:

CHANNEL 1 – TS

Amp FX Send

CHANNEL 2 – TS

Amp FX Return

Or:

CHANNEL 1 – TRS

Stereo Audio

CHANNEL 2 – TRS

Expression / Control

Configure it for the connections YOUR pedalboard actually needs.

BIDIRECTIONAL

There is technically no input or output.

Each channel is completely passive and can pass its signal in either direction.

A TS channel passes Tip and Sleeve.

A TRS channel passes Tip, Ring and Sleeve.

No signal processing takes place inside the box.

NO SIGNAL PROCESSING

This is a passive patch bay.

There are:

• No buffers

• No active electronics

• No footswitches

• No batteries

• No power connections

Each channel simply provides a hardwired pass-through connection.

DIMENSIONS

• 3.63" × 1.5" × 1.06"

• 9.22 × 3.81 × 2.69 cm

• 92.2 × 38.1 × 26.9 mm

Tiny enough to fit along the edge or underneath many pedalboards.

POWER

No power required

CONNECTIONS

• 4 x 1/4" premium jacks

• 2 independent pass-through channels

• TS and/or TRS configurations available

AVAILABLE CONFIGURATIONS:

• TS / TS

• TRS / TRS

• TS / TRS

• TRS / TS

CONSTRUCTION

• Rugged aluminum 1590A enclosure

• Premium jacks

• Two independently wired signal paths

• Completely passive

• Ultra-compact pedalboard-friendly footprint

• Handcrafted in the USA by Loop-Master Pedals

IMPORTANT

This is a passive two-channel patch bay / junction box.

“Isolated” means the two channels are independently wired and electrically separate from one another.

This is NOT an audio isolation transformer and is not intended to provide transformer isolation for eliminating ground loops.