Sony TA-F6B Late 70s - Grey. Works! Partially Restored! Dual Voltage!

I purchased this unit completely inoperable. The thermal cutoff was open from fatigue and was replaced. Powers on now, some audio from the speaker outputs. All dials and controls need to be Deoxed for the amp to be fully functional. Also the VU Meter lighting needs to be replaced. 

Power supply has new capacitors installed except for the large main caps, they still tested good. See photos. I will include the original caps for reference. 

Front panel is in good shape for its age. Lid needs to be refinished, has light surface rust in a couple places. 

This Sony amp is dual voltage (120v/240v) and is a AEP/UK/E spec amplifier. This model wasn’t originally sold in the US. 

This amp is quite heavy and will be packaged carefully. Shipping is free to the lower 48 states only. Overseas or AK/HI will require an additional shipping charge.

Key Specifications

• Power Output: 100W + 100W (8\(\Omega \), 20Hz - 20kHz)
• Total Harmonic Distortion (THD): Less than 0.03% (at rated output)
• Frequency Response: 5Hz - 35kHz
• Damping Factor: 50 (1kHz, 8\(\Omega \))
• Signal-to-Noise Ratio (SNR): Phono: 76dB, Tuner/Aux: 100dB [1, 2, 3]

Inputs & Features

• Phono Inputs: Features two switchable phono inputs (supports MM and MC cartridges)
• Auxiliary/Line Inputs: Tuner, Aux 1, Aux 2, and two Tape inputs/outputs
• Pre-amp/Power-amp: Separable pre-out and main-in capabilities [1]