Zeygot Fuzz - Fuzz and Noise pedal

The Zeygot Fuzz is a fuzz pedal with a built in Noise generator. The Noise Generator is turned on/off with the footswitch in the corner.

Without the Noise, Zeygot is silicon fuzz pedal, with a Fuzz control with big range. Plenty of harmonics in the highest setting and softer rhythm guitar sound in the lower settings. It is built with True Bypass, adjusted with the main footswitch, and for 9v power supply with standard polarity (center negative).

Pressing the switch in the left corner activates a light sensor in the right corner. Now feedback and Noise is adjusted by covering the sensor. The sensitivity of the sensor is adjusted with the Noise control knob. Depending on the light available in the room, you may set it at the limit where the Noise begins (with sensor covered). Now you can create special sounding fuzz, with tons of sustain and harmonics, by lifting you foot, letting some light into the sensor. The fuzz gradually comes back to normal "un-noised" fuzz when the sensor is covered again.

You may also set the Noise knob to a very low setting. This will let you affect sustain and volume a little bit by exposing the sensor. At the highest setting the pedal becomes very sensitive and creates Noise all the time. The range of of the Noise control depends on the setting of the Fuzz control.

The volume knob needs no explanation, it just sets the output volume.

The pedal is hand built in Sweden. I use a laser engraving machine to make the text and logo on the top.