For a limited time I am offering this pedal at a discount to introduce it to players.
Moded
to sound IDENTICALLY after a very famous and very expensive
Bluesbreaker style KOT pedal and you do not have to stand in line and
wait a year to get one. Some of us with over 300 years of combined guitar experience in stages across Canada gathered in TO in a home studio with
some strats,Tele's PRS and IBZ Jems and a original KOT and THIS
creation and a Fender Deluxe amp for 3 hours trying to see how close
this pedal can get and none of us could not tell any difference from
this to the original what so ever, true story.
Note: Power supply not included. Please use a 9V DC power adapter whose polarity is negative centre otherwise, the product may not work properly.
No Duty to Canada and USA FAST 'N FREE USA Shipping (typically about 4 days via USPS ) Ships from Canada
*Just to be clear on DUTY, (regardless of what Reverb warns buyers of ) Canada and the USA have a trade agreement in place that allows US citizens to purchase/import up to $800 dollars per purchase in to the United States from Canada with NO Duty at all, State taxes are another story, some states charge a TAX some do not, BUT NO duty.
OVERALL
There is also a 4 position DIP switch on the inside of the pedal, which you can use to choose between Clean, OD, or DISTORTION mode for each side.I designed this switch to allow almost anyone to be able to find the exact sounds they want in this pedal. The modes are: 1) Normal Overdrive mode (OD mode): This is the standard King Of Tone sound, which Jim like best- a little less drive available than a tube screamer.Factory DIP switch setting has this mode on the right side. This mode can get about 4 times louder than a tube screamer if desired 2) CLEAN mode : This mode has less distortion, it can be used for clean boosts or clearer, louder sounds. It's sort of a cross between a true clean boost and an overdrive. CLEAN MODE is even less compressed than the standard OD mode. The factory DIP switch setting uses this mode on the left channel. This mode can get twice as loud as the OD mode. 3) DISTORTION mode : This mode has more drive than the standard mode- a touch of hard distortion. The sound is more compressed, yet retains the pedal’s character. This mode can get almost twice as loud as a tube screamer. Distortion mode is not on either side with the factory DIP switch setting. 4)add a hi gain switch to choose the high gain and norm model
MANUAL
DIP switch settings There are 4 DIP switches. Factory setting is 1 2 3 4: ON OFF OFF OFF (up, down, down, down) The two left switches (1 and 2) are for the RED (right) side. 1st switch down=clean, up=OD. 2nd switch is for DIST mode when up. When the DIST switch is up, the position of the 1st switch does not matter much but best if you turn it OFF for more clarity. The 2 switches on the right side are for the YELLOW side, and work just like the Red side (#3 = CLEAN or OD, #4=DIST if UP). The factory setting ON OFF OFF OFF sets the RED (right) channel to OD and Yellow (left) to CLEAN , so you can decide if you like one sound best,or would like to have both available. If you want both available, leave switches in this setting. To set both channels to be OD mode (CLEAN mode will not be available) then set switches to: ON OFF ON OFF. To set both channels to CLEAN mode (OD not available), set to: OFF OFF OFF OFF. It is best to have the right (red) side to be the more distorted side, as it comes before the left (yellow) side and will allow the left side to do more boosting that way. Running a clean boost before an OD will add distortion but not much volume. Running a clean boost after an OD will add more volume without changing the distortion much. So you can use it either way you like.
