Marshall DSL40CR 40W 1x12" 2-channel Guitar Combo Amp DSL Tube Amplifier
PriceC$1,650
+ C$245 Shipping
Listed:over a month ago
Views:770
Watchers:6
New Westminster, Canada
Brand New, sealed in original box, never used, in perfect condition!
Marshall product info:
Tap into burly Marshall tone anywhere from your bedroom to the stage, with the Marshall DSL40CR tube combo amplifier. With per-channel Gain and Volume controls, a dedicated Resonance control, reverb, and an effects loop, the DSL40CR is ready to gig. And with its adjustable power level, you can dial in cranked-amp tones that won't wake your neighbors — or even use the Softube speaker-emulated output for direct recording and monitoring. Marshall even refined the EQ section for extremely versatile tone shaping. From glassy cleans to bone-rattling crunch to blistering high gain, your wish is the Marshall DSL40CR's command.
A 40-watt tone beast
Marshall's DSL40CR is an all-tube, twin-channel workhorse capable of conjuring any classic Marshall sound — past or present. Four ECC83s in the preamp section (in concert with the amp's gain/master volume arrangement) give you stunning tone-shaping mojo, and with two EL34s in the engine room, you have the volume to rule any club in the world. Sporting the same tubes (minus two EL34s) and feature set as the original DSL100, this little beast has critical upgrades that give you even more control over your sound. A Resonance control (as opposed to the original's fixed deep switch) lets you dial in your preferred amount of low-end girth. You also get studio-grade digital reverb (instead of spring), high and low power settings, and a bypassable rear-panel series effects loop. Marshall has even included a 2-way footswitch for channel switching and reverb on/off.
The DSL series — a revered tonal heritage
The Marshall DSL40CR hails from a revered lineage. Marshall introduced the JCM2000 Dual Super Lead (DSL) series amps in 1997. Right from the get-go, these all-tube monsters enjoyed enthusiastic approval by guitarists and the press alike, forming the backlines of top acts in all musical genres and bludgeoning audiences worldwide for a decade before being replaced by Marshall's JVM series (a musical powerhouse in its own right). Considered the go-to rock amp by many tone-savvy guitarists, there is considerable pent-up demand for Dual Super Leads. And thus, Marshall is proud to introduce the new-and-improved DSL series.
Features:
Capable of conjuring any classic Marshall sound — past or present
2 channels — Classic Gain and Ultra Gain
Each channel features two modes — Clean/Crunch and OD1/OD2, respectively
High and low power modes allow you to dial in appropriate volume for any setting
Line output with Softube's accurate emulation of a Marshall 1960 cab
Highly effective Resonance control replaces the original's fixed deep switch
Refined EQ section gives you incredible tonal flexibility
Studio-grade digital reverb
Bypassable rear-panel series effects loop
Included 2-way footswitch for channel switching and reverb on/off
Tech Specs
Type: Tube Number of Channels: 2-channel (2 modes each) Total Power: 40W (20W power setting)
Speaker Size: 1 x 12" Celestion V-Type speaker Preamp Tubes: 4 x ECC83 Power Tubes: 2 x EL34
Reverb: Classic, Ultra EQ: 3-band EQ, Tone Shift, Resonance Effects Loop: Yes
Inputs: 1 x 1/4" (instrument), 1 x 1/8" (aux in)
Outputs: 2 x 1/4" (4 ohm), 2 x 1/4" (8 ohm), 1 x 1/4" (internal 16 ohm speaker), 1 x 1/4" (Softube emulated out)
MIDI I/O: In Footswitch I/O: 1 x 1/4" (channel, effects loop) Footswitch Included: Yes, 2-button footswitch
Power Source: Standard IEC AC cable
Condition | |
Brand | |
Model |
|
Categories | |
Speaker Configuration |
|
Electronics |
|
Reverb |
|
Brand New, sealed in original box, never used, in perfect condition!
Marshall product info:
Tap into burly Marshall tone anywhere from your bedroom to the stage, with the Marshall DSL40CR tube combo amplifier. With per-channel Gain and Volume controls, a dedicated Resonance control, reverb, and an effects loop, the DSL40CR is ready to gig. And with its adjustable power level, you can dial in cranked-amp tones that won't wake your neighbors — or even use the Softube speaker-emulated output for direct recording and monitoring. Marshall even refined the EQ section for extremely versatile tone shaping. From glassy cleans to bone-rattling crunch to blistering high gain, your wish is the Marshall DSL40CR's command.
A 40-watt tone beast
Marshall's DSL40CR is an all-tube, twin-channel workhorse capable of conjuring any classic Marshall sound — past or present. Four ECC83s in the preamp section (in concert with the amp's gain/master volume arrangement) give you stunning tone-shaping mojo, and with two EL34s in the engine room, you have the volume to rule any club in the world. Sporting the same tubes (minus two EL34s) and feature set as the original DSL100, this little beast has critical upgrades that give you even more control over your sound. A Resonance control (as opposed to the original's fixed deep switch) lets you dial in your preferred amount of low-end girth. You also get studio-grade digital reverb (instead of spring), high and low power settings, and a bypassable rear-panel series effects loop. Marshall has even included a 2-way footswitch for channel switching and reverb on/off.
The DSL series — a revered tonal heritage
The Marshall DSL40CR hails from a revered lineage. Marshall introduced the JCM2000 Dual Super Lead (DSL) series amps in 1997. Right from the get-go, these all-tube monsters enjoyed enthusiastic approval by guitarists and the press alike, forming the backlines of top acts in all musical genres and bludgeoning audiences worldwide for a decade before being replaced by Marshall's JVM series (a musical powerhouse in its own right). Considered the go-to rock amp by many tone-savvy guitarists, there is considerable pent-up demand for Dual Super Leads. And thus, Marshall is proud to introduce the new-and-improved DSL series.
Features:
Capable of conjuring any classic Marshall sound — past or present
2 channels — Classic Gain and Ultra Gain
Each channel features two modes — Clean/Crunch and OD1/OD2, respectively
High and low power modes allow you to dial in appropriate volume for any setting
Line output with Softube's accurate emulation of a Marshall 1960 cab
Highly effective Resonance control replaces the original's fixed deep switch
Refined EQ section gives you incredible tonal flexibility
Studio-grade digital reverb
Bypassable rear-panel series effects loop
Included 2-way footswitch for channel switching and reverb on/off
Tech Specs
Type: Tube Number of Channels: 2-channel (2 modes each) Total Power: 40W (20W power setting)
Speaker Size: 1 x 12" Celestion V-Type speaker Preamp Tubes: 4 x ECC83 Power Tubes: 2 x EL34
Reverb: Classic, Ultra EQ: 3-band EQ, Tone Shift, Resonance Effects Loop: Yes
Inputs: 1 x 1/4" (instrument), 1 x 1/8" (aux in)
Outputs: 2 x 1/4" (4 ohm), 2 x 1/4" (8 ohm), 1 x 1/4" (internal 16 ohm speaker), 1 x 1/4" (Softube emulated out)
MIDI I/O: In Footswitch I/O: 1 x 1/4" (channel, effects loop) Footswitch Included: Yes, 2-button footswitch
Power Source: Standard IEC AC cable
Condition | |
Brand | |
Model |
|
Categories | |
Speaker Configuration |
|
Electronics |
|
Reverb |
|
Your purchases help youth music programs get the gear they need to make music.
Your purchases also help protect forests, including trees traditionally used to make instruments.