Metric Halo LIO-8 4 Channel (1-4) ULN-R Preamp Kit

This Kit adds channels 1-4 of ULN-R preamps and an 8 channel DB-25 Input connector board to an existing LIO-8.

These are the same preamps as used in the ULN-8.

Mic Pre Input + ADCInput Impedance3.3 kΩDynamic Range (-60 dB, flat 0-22.05 kHz, typ)115 dBDynamic Range (-60 dB, A-weighted, typ)118 dBNoise Floor (flat 0-22.05 kHz, typ)115 dBNoise Floor (A-weighted, typ)117.9 dBGain Range-22 dB to +91.5 dBGain Precision±0.05 dBGain Step0.5 dBTHD D/A/A/D loop @ -12 dBFS0.0007 %THD D/A/A/D loop @ -12 dBFS +12 dB Gain0.0015 %THD D/A/A/D loop @ -0 dBFS0.0023 %Crosstalk @ 1kHz-110dBIMD 1k component (19 kHz/20kHz @ +8dBu)-104 dBuEIN @ 60 dB Gain (150Ω Source Impedance)-130.50 dBuEIN @ 60 dB Gain (0Ω Source Impedance)-133.25 dBuAnalog Send Calibration (ADC = 0 dBFS)+21.5 dBuPhantom Power (Switchable Per Channel)+48 VoltsMic Pre + ADC Frequency Response+0/-0.1dB @ fs = 44100 Hz8.9 Hz - 20.5 kHz+0/-1.0dB @ fs = 44100 Hz2.9 Hz - 21.0 kHz+0/-0.1dB @ fs = 96000 Hz8.9 Hz - 43.9 kHz+0/-1.0dB @ fs = 96000 Hz2.9 Hz - 45.4 kHz+0/-0.1dB @ fs = 192000 Hz8.9 Hz - 42.1 kHz+0/-1.0dB @ fs = 192000 Hz2.9 Hz - 64.7 kHz5° low-end in-channel phase deviation point20.0 HzInterchannel phase 0 Hz - 20 kHz< ±0.05°Crosstalk from SMPTE Input< -142 dB