Doepfer A-130-3V 1U Dual lin/log VCA Vintage

Module A-130-3(1U) is the 1U version of the A-130-2. The functions of A-130-3 are exactly the same as for the A-130-2. Only the positions of the controls and sockets are different because of the 1U format.

The module is composed of two identical voltage controlled amplifiers (VCA). Each VCA has a manual gain control (also named Initial Gain) and a control voltage input with attenuator. The character of the control scale can be switched to linear or exponential. All inputs and outputs are DC coupled. Consequently the VCAs can be used to process both audio and control voltages (e.g. for voltage control of the level of LFO or envelope signals). The signal input has no attenuator available but is capable to process up to 16Vpp signals (i.e. -8V...+8V) without distortion. For the processing of higher levels an external attenuator (e.g. A-183-1) is recommended. The amplification range is 0...1. Even with a higher external control voltage the amplification remains at 1 (kind of "amplification clipping" at 1). 

• Width: 22HP
• Depth: 50mm
• Power: +30mA @ +12V / -30mA @ -12V

Features:

• Four linear VCAs with a common level control section for all
• Four inputs/outputs
• Simultaneous amplitude/level control of up to four different audio or CV signals
• Simultaneous control of the frequency modulation depth of 4 VCOs
• Simultaneous control of the pulsewidth modulation depth of 4 VCOs
• Simultaneous control of quadrophonic signals
  
• Control Man.: manual control of the amplification
• Control CV: attenuator for the control voltage applied to socket CVo socket Input 1