Gibson ES-335 British Racing Green #221060180

This ES-335 is a Gibson Exclusive, finished in British Racing Green gloss nitrocellulose lacquer. The deep green is set off by single-ply cream binding on the top, back and fingerboard, a black 5-ply pickguard and nickel hardware.

The body is 3-ply maple/poplar/maple over a solid maple centre block, the construction Gibson credits with the 335's sustain and its resistance to feedback at volume. The mahogany neck has a Rounded C profile, Gibson's middle-ground carve, glued in and topped with a 12" radius rosewood fingerboard, acrylic dots and 22 medium jumbo frets.

Calibrated T-Type humbuckers are hand-wired to 500K pots and Orange Drop capacitors, with a volume and a tone for each pickup. An ABR-1 Tune-O-Matic and aluminum stop bar anchor the strings, with Vintage Deluxe tuners at the headstock.

It weighs 8 lb 9 oz and comes with a Gibson hardshell case.

SPECIFICATIONS

BODY
Body: 3-ply Maple/Poplar/Maple
Top: 3-ply Maple/Poplar/Maple
Back: 3-ply Maple/Poplar/Maple
Sides: 3-ply Maple/Poplar/Maple
Centerblock: Maple
Bracing: Spruce
Binding: Single-ply Cream; Top, Back, and Fretboard
Finish: British Racing Green, Gloss Nitrocellulose Lacquer
Weight: 8 lb 9 oz
Serial: 221060180

NECK
Neck: Mahogany
Profile: Rounded C
Joint: Glued In, Set Neck
Fingerboard: Rosewood, 12.0" radius
Frets: 22, Medium Jumbo
Inlays: Acrylic Dot
Nut: Graph Tech, 1.7"
Scale Length: 24.75"
End of Board Width: 2.26"
Truss Rod: Adjustable

ELECTRONICS
Neck Pickup: Calibrated T-Type Rhythm
Bridge Pickup: Calibrated T-Type Lead
Controls: 2 Volume, 2 Tone, Hand-wired with 500K Potentiometers and Orange Drop Capacitors
Pickup Selector: 3-way Toggle
Output Jack: 1/4"

HARDWARE
Bridge: ABR-1 Tune-O-Matic
Tailpiece: Aluminum Stop Bar
Tuners: Vintage Deluxe with Keystone Button
Hardware Finish: Nickel
Control Knobs: Black Top Hat with Silver Reflector
Pickguard: Black 5-ply
Switch Tip: Cream
Strings: .010, .013, .017, .026, .036, .046

CASE
Included: Hardshell case, Gibson Accessory Kit