For your consideration is this Tanara P-bass copy with the P/J pickup set up. This one has a very nice patina, lightly worn and scratched, but not beat to hell. Plays pretty great and has that wonderful range of tones that you can get with the P/J pick up config.
You want punchy mid range? Crank the p-pup up and the j-pup down.
You want fat jazz tone? Crank the j-pup up and the p-pup down.
You want to sound like a milder version of Geezer Butler? Crank both pick-ups up, and face the facts that none of us sound like Geezer.
As far as history, I can't find much on this run of basses. I have seen them labeled as both Korean and Japanese made, so it is hard to pin down exactly which it is. If I had my guess, I would say it was either made by Matsumoko (Teisco's Holding Company) or Samick, both of which make great guitars and basses.
The only real work I did to this was rebuild the nut with a little bit of plastic epoxy in the nut slots to stop a buzz. The original slots had worn down and I did not have a bass nut handy to fit, so I just too a little hard platic epoxy and reshaped the nut. Should be just as good.
This is 100% a bass I would keep for myself, because I have one just like it in a Fender make. P/J. This is why I bought this one, this is a bass I would buy myself and recommend for all bassists, beginner to expert. The P/J bass is a swiss army knife of bass tone. As always, I cleaned it up, polished the finish, oiled the board, changed the strings, cleaned the electronic components and set the action as low as I could. This bass doesn't come with a case or gig bag.
You want punchy mid range? Crank the p-pup up and the j-pup down.
You want fat jazz tone? Crank the j-pup up and the p-pup down.
You want to sound like a milder version of Geezer Butler? Crank both pick-ups up, and face the facts that none of us sound like Geezer.
As far as history, I can't find much on this run of basses. I have seen them labeled as both Korean and Japanese made, so it is hard to pin down exactly which it is. If I had my guess, I would say it was either made by Matsumoko (Teisco's Holding Company) or Samick, both of which make great guitars and basses.
The only real work I did to this was rebuild the nut with a little bit of plastic epoxy in the nut slots to stop a buzz. The original slots had worn down and I did not have a bass nut handy to fit, so I just too a little hard platic epoxy and reshaped the nut. Should be just as good.
This is 100% a bass I would keep for myself, because I have one just like it in a Fender make. P/J. This is why I bought this one, this is a bass I would buy myself and recommend for all bassists, beginner to expert. The P/J bass is a swiss army knife of bass tone. As always, I cleaned it up, polished the finish, oiled the board, changed the strings, cleaned the electronic components and set the action as low as I could. This bass doesn't come with a case or gig bag.
| Listed | 9 years ago |
|---|---|
| Condition | Very Good (Used) Very Good items may show a few slight marks or scratches but are fully functional and in overall great shape.Learn more |
| Brand | |
| Model |
|
| Finish |
|
| Categories | |
| Year |
|
| Made In |
|
| Number of Strings |
|
Product safety information may be available here.











