JL Audio Fathom SA-600W - Subwoofer Amplifier / Processor - NEW!

PLEASE CHECK AVAILABILITY BEFORE BUYING. Our stocks can change any minute.
Brand New! – Closed Box
We are authorised dealers of the finest audio gear and musical instruments.
Note 1: Free shipping within EU. Shipping price to any other country is only an estimation and has to be quoted.
Note 2: This product is custom ordered, please check availability and delivery times.
Note 3: This product is factory set for 240V.
Note 4: We sell without taxes anywhere outside Europe and to valid VAT ID companies inside Europe. Please ask us your price without Tax in those cases.
Note 5: We can quote any kind of bundle with our products at the most convenient prices. Just visit our store and ask for it.

JL AUDIO FATHOM SA-600W – SUBWOOFER AMPLIFIER / PROCESSOR
Subwoofer Amplifier/Processor with rack mount option and JLink™ Connectivity
Equipped with flexible features and a robust power amplifier section, the Fathom® SA-600W is an ideal choice to drive a custom subwoofer system in home theater and home audio systems. The full set of Fathom® signal processing features is included, along with additional DSP features, managed through an intuitively designed onboard interface. With its precisely engineered switching power supply and proprietary Class-D amplifier topology, the SA-600W is capable of efficiently delivering up to 600 watts of continuous power.
The SA-600W includes the following features:
• Pristine, stereo audio circuit pathways used throughout
• Intuitive interface with LCD display provides detailed control of on-board settings and functions
• On-board, 2-way active crossover (12/24 dB per octave), capable of supporting a stereo system with a low-pass filtered subwoofer output and high-pass filtered line outputs to feed the main speakers’ amplifier
• Built-in, optimized equalizer curves for use with JL Audio subwoofers systems
• Fixed or variable level control options
• Selectable polarity control (0 or 180 degrees) to optimize subwoofer integration
• Programmable delay controls for the SA-600W’s subwoofer outputs and line outputs.
• E.L.F. (Extreme Low Frequency) trim applies equalizer cut or boost at 25 Hz (-12 to + 3 dB) to tailor a subwoofer’s response for a particular room.
• D.A.R.O. (Digital Automatic Room Optimization) automatically measures and corrects in-room response to optimize low frequency performance (requires optional JL Audio calibration microphone – CAL-MIC1 – sold separately)
• Three band parametric equalizer with configurable center frequency, Q and gain, to further optimize subwoofer system response
• Grounded or Isolated input mode options for quiet, noise-free performance
• Stereo, high-level inputs accept direct connection from amplified receiver outputs when no line level signal is available.
• Wireless signal connectivity is available via the optional JLink™ Transmitter/Receiver system (JLink™ TRX – sold separately).
• Automatic turn-on options via signal sensing or 12V trigger. 12V input and output triggers to control additional SA-600Ws or peripheral equipment
• Front-mounted USB port and DFU button provides easy access to update firmware.
• Versatile mounting options for table-top setups or rack-mount installations.
General Specifications
Amplifier Power
600 W x 1 at 3 ohms
450 W x 1 at 4 ohms
300 W x 1 at 6 ohms
225 W x 1 at 8 ohms
Power Mode(s) Off, On or Automatic (Signal-Sensing or 12V Trigger)
12V Trigger Output Capacity 150 mA (1/8-inch/3.5mm mini jack)
Light Modes N/A
Signal Processing
Unbalanced Inputs Stereo or Mono (two RCA jacks - Input Impedance of 50k Ohms)
Speaker/High-Level Inputs Stereo or Mono (removable plug - Input Impedance of 4.4k Ohms)
Input Grounding Isolated or Grounded
Level Control Reference (fixed gain) or Variable from -50dB to +15dB over reference gain (0.5 dB increments)
Filter Mode(s) Low-Pass, with tracking High-Pass Outputs
Filter Slope(s) 12/24 dB/octave
Filter Frequency Range 30 Hz - 130.1 Hz
Filter Defeat Function Yes
Polarity 0 or 180 degrees
Delay (Phase) Variable from 0 – 25 ms 
(0.1 ms increments, Sub and HP outputs)
Extreme Low Frequency (E.L.F.) Trim Variable, -12 dB to +3 dB at 25 Hz (0.5 dB increments)
Line Outputs Stereo or Mono (two RCA jacks - Pass-Through or High-Pass)
Subwoofer Outputs Neutrik speakOn® 2-Pole Connectors
(uses Neutrik part: NL2FX)
Calibration Mode Digital Automatic Room Optimization (D.A.R.O.), requires microphone (sold separately)
Equalizer Bands 3
Equalizer Frequency Range 20 to 160 Hz (1 Hz increments)
Equalizer Gain Range -12 dB to +12 dB (0.2 dB increments)
Equalizer Q Range 0.7 to 5.0 (0.1 increments)
Amplifier Physical Specifications
Width (W) 16.84 in / 428 mm
Height (H) 1.75 in / 44 mm
Depth (D) 13.63 in / 346 mm
Net Weight 13.5 lb / 6.12 kg
Note: Single Rack Unit - Amplifier Height Dimensions do not include feet.