Loop-Master Pedals Eventide H90 6-Button Aux Footswitch – Dual FS3X Style Controller MADE IN USA IN STOCK!

LOOP-MASTER PEDALS EVENTIDE H90 6-BUTTON AUX FOOTSWITCH

Six additional footswitches for your Eventide H90 in one low-profile strip.

This Loop-Master Pedals controller is essentially two FS3X-style 3-button auxiliary controllers combined into one enclosure, designed to take advantage of both EXP/CTL inputs on the Eventide H90.

The H90 supports up to three normally-open momentary switches from each EXP/CTL jack, allowing this controller to provide six independent auxiliary switches — Aux 1 through Aux 6. Eventide Audio CDN

Connect one TRS output to EXP/CTL 1 and the second TRS output to EXP/CTL 2.

No MIDI. No power. Just six additional physical switches at your feet.

WHAT IT DOES

• Adds six external footswitches to the Eventide H90

• Two independent banks of three switches

• Switches 1–3 connect to EXP/CTL 1

• Switches 4–6 connect to EXP/CTL 2

• Uses normally-open momentary switching as specified by Eventide

• Compact strip design fits neatly along the front or rear edge of a pedalboard

• Passive operation — no power required

The H90 allows external aux switches to be assigned to a wide variety of functions, including performance controls, bypass functions, HotSwitch functions, preset navigation and other programmable parameters. Eventide Audio CDN

H90 HOOKUP

H90 EXP/CTL 1 → TRS cable → Aux 1/2/3 jack

H90 EXP/CTL 2 → TRS cable → Aux 4/5/6 jack

Each group operates like a conventional three-button Eventide/FS3X-style auxiliary controller.

For each three-switch group:

• Switch 1 = Tip

• Switch 2 = Ring

• Switch 3 = Tip + Ring

Eventide uses this same arrangement for its three-button auxiliary switching. Eventide Audio

REAL-WORLD USE

Set up the six switches for functions such as:

• Perform 1–6

• Program Active/Bypass

• Preset A/B bypass

• HotSwitch functions

• Increment / decrement

• Tap tempo

• Algorithm-specific performance controls

• Other assignable H90 functions

One particularly useful configuration is assigning the six switches directly to the H90's six Perform controls, giving you immediate access to all six without changing Perform pages. Eventide specifically documents mapping external aux switches to these controls. Eventide Audio

OTHER EVENTIDE COMPATIBILITY

The individual 3-button sections use the familiar Eventide/FS3X-style momentary switching arrangement and can also be useful with other Eventide equipment that accepts a three-button TRS auxiliary switch, including:

• Eventide H9 / H9 Max

• TimeFactor

• ModFactor

• PitchFactor

• Space

These pedals support three-button auxiliary switching through a TRS connection. Eventide specifically lists the DigiTech FS3X among compatible triple aux switches for the H9 and Factor series. Eventide Audio

NOTE: The full six-switch configuration is designed specifically around the H90's two EXP/CTL inputs. On Eventide pedals with only one compatible aux/EXP input, use one three-switch section rather than all six switches independently.

DIMENSIONS

• 12" x 1.25" x 1.125"

• 30.5 x 3.2 x 2.9 cm

• 305 x 32 x 29 mm

The long, narrow enclosure provides six switches while taking up very little pedalboard depth.

POWER

No power required

Completely passive momentary switching.

CONSTRUCTION

• Six heavy-duty momentary footswitches

• Two independent TRS control outputs

• Premium jacks

• Rugged aluminum enclosure

• Handcrafted in the USA by Loop-Master Pedals

CABLES

For full H90 six-switch operation, two standard TRS cables are required (not included) — one for each group of three switches.