The Focusrite RedNet HD32R Network Interface is perfect for Post Production, Broadcast, Live Sound or the Recording Studio applications. A pair of DigiLink mini connectors allows Focusrite RedNet HD32R to connect directly to any Pro Tools | HD system whether it's Native, HDX or even a legacy TDM system. Multiple Focusrite RedNet HD32R units can be on the same Pro Tools system up to the maximum I/O channel count of Pro Tools, and Loop Sync I/O allows seamless integration with other Pro Tools interfaces such as HD I/O and Sync HD I/O.

• 32x32 Pro Tools | HD I/O for Dante audio-over-IP networks at up to 96kHz (16x16 at 192kHz)
• Primary and Expansion DigiLink mini connections
• Up to 24-bit, 192kHz sampling rates
• AES67 compliant
• Dual power supplies and network connections with full power and network redundancy including locking connectors for maximum reliability
• Word Clock and Loop Sync I/O for increased flexibility and integration with other Pro Tools | HD hardware
• Comprehensive remote control and remote signal metering through RedNet Control

• Digital Performance:
  • Supported Sample Rates: 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (-4 / -0.1 / 0.1 / 4.167) at 24 Bit
  • Clock Sources: Internal, Word Clock, Loop Sync (Master or Slave) or from Dante Network Master
  • External Word Clock Range: Nominal sample rate ±7.5
  • Channel Count: 32x32 at Up to 96kHz Sampling Rate, 16x16 at 176.4 and 192kHz
• Rear Panel Connectivity:
  • Primary Port: 1 x Mini DigiLink
  • Expansion Port: 1 x Mini DigiLink
  • Word Clock Input: 1 x BNC 75 ohm Port (Switchable Termination)
  • Word Clock Output: 1 x BNC 75 ohm Port
  • PSU: 2 x IEC Inputs with Retaining Clips
  • Network: 2 x etherCON NE8FBH-S, Also Compatible with Standard RJ45 Connectors
• Front Panel Indicators:
  • Primary PSU (A): Green LED. Illuminates When An AC Input is Applied and All DC Outputs are Present
  • Primary PSU (B): Green LED. Illuminates When An AC Input is Applied and All DC Outputs are Present
  • Primary Network: Green LED. Indicates that a Network Connection is Present on Primary Port When in Redundant Mode
  • Secondary Network: Green LED. Indicates that a Network Connection is Present on Secondary Port When in Redundant Mode
  • Network Locked: Green LED. When Unit is Network Slave, Shows Valid Network Lock. When Unit is Network Master
  • Sample Rate: Orange LED for each: 44.1 kHz, 48 kHz, x2, x4
  • Pull Up/Down: Orange LED. Indicates Unit is Set to Operate on a Dante Pull Up/Down Domain
  • Signal Indicators: 16 Green LEDs, 8 Input/8 Output Indicators. Illuminate @ -126dBFS
  • Clock Source: Orange LED for each: Internal, Word Clock, Loop Sync and DAW Master
• Network Modes:
  • Redundant: Allows Unit to Connect Two Independent Networks
  • Switched: Connects Both Ports to Integrated Network Switch Allowing Daisy-Chaining of Device
• Dimensions & Weight:
  • Height: 44.5mm/ 1.75"
  • Width: 482.6mm/ 19"
  • Depth: 263mm/ 10.35"
  • Weight: 3.9kg
• Power:
  • Power PSU: 2 x Internal, 100-240V, 50/60Hz, Consumption 30VA
• Heat Performance:
  • Operating Temperature: Operates at Up to An Ambient Temperature of 50 Degrees Celcius

• Focusrite RedNet HD32R Network Interface
• 1 x IEC AC Mains Cable
• 2 x IEC Mains Cable Retaining Clips
• Safety Information Cut Sheet
• RedNet Getting Started Guide
• Product Registration Card, Provides Links to:
  • RedNet Control
  • RedNet PCIe Drivers (Included with RedNet Control Download)
  • Audinate Dante Controller (Installed with RedNet Control)
  • Dante Virtual Soundcard (DVS) Token and Download Instructions
• 2 Year Warranty