Pioneer CT-F1250 - Fully refurbished, new belts, pinch roller, above factory specifications. High serial number.

PIONEER CT-F1250

Fully refurbished, new belts, pinch roller, above factory specifications. High serial number. 
Stereo Cassette Deck with 3-Head / 2-Motor Quartz Direct Drive, Memory Stop / Repeat & Pioneer-Exclusive WqLB Tuning System

Engineered for Excellence
- 3 Head Monitor-Capable with Memory Stop/Repeat
- Uni-X’Tal Ferrite Metal-Capable Heads & “Small-Window” Erase
- Quartz/Direct Drive 2-Moror DC for Low 0.03% Wow/Flutter
- Closed-Loop Dual Capstan with Automatic Tape-Slack Canceller
- Pioneer-Exclusive WqLP Tuning System with LEDs
- 25-Segment Fluroscan 3-Mode Meter, 4-Digit Electronic Counter, Wide-Range Amplifiers & More

CT-F1250 Specifiations
Type: Compact cassette tape deck, 2-channel stereo/mono
Motors: Quartz-PLL direct drive motor for capstan drive, DC high torque for fast forward and rewind 
Heads: “Uni-Crystal Ferrite” recording/playback head (combination type). “Small-Window” erasing head x 1
Fast Winding Time: Within 86 seconds (C-60 tape)
Wow and Flutter: No more than 0.03% (WRMS)
Frequency Response:
Standard, LH tapes: 20 to 18,000Hz
Ferrichrome tape: 20 to 20,000Hz
Chrome tape: 20 TO 20,000Hz
Metal tape: 20 TO 20,000Hz
Signal-to-Noise Ratio: Dolby OFF: more than 59dB. Dolby ON: more than 69dB (over 5kHz, standard, LH tapes). When a chromium dioxide tape is used, S/N is further improved by 4.5dB over 5kHz
Harmonic distortion: No more than 1.0% (0dB)
Inputs (Sensitivity/Maximum allowable input/impedance): MIC x 2” 0.3mV/100mV/30 kOhms, 6mm jacks (Reference MIC impedance, 250 Ohms to 10 kOhms). LINE x 2: 63mV/25V/50 kOhms, pin jacks
Outputs (Refrence level/Maximum level/Load impedance): Line x 2: 450mV/640mV/50 kOhms, pin jacks.
HEADPHONES x 1: 63mV/90mV/8 Ohms, 6mm stereo jack with output level controls
Semiconductors: ICs – 22. Transistors – 139. Dioded – 125 including 9 zener diodes and 18 LEDs
Other Features:
1) Dolby system (ON/OFF) with LED indicator
2) Tape selector (METAL/Chrome Dioxide/Fe-Cr/STD with METAL, CrO2 and Fe-Cr LED indicators
3) Tape calibration (Bias, Level and EQ) with LED indicators
4) Memory stop and play
5) Automatic repeat (Counter and End repeat)
6) Timer aid recording/playback device
7) Fluorescent display level meter with Peak/Peak Hold/Average Switch (-30dB to +8dB)
8) Electronic digital tape counter
9) Automatic tape slack canceller
10) Pitch control
11) REC mute device
12) Input Mixing (LINE + MIC)
13) DIM/BRIGHT switches for Meter and Counter display
14) Cassette Compartment illumination
15) Output level control (clicked for reference level; Left/Right coupled)
Power requirements: 120/220/240V (switchable), 50-60 Hz
Power consumption: 59 watts
Dimensions: 16-9/16(W) x 7-3/8(H) x 14-9/16(D) inches. 420(W) x 187(H) x 369.5(D) mm
Weight: 24 lb. / 10.9kg