• SPECS
• • neck type GSR4 Maple neck
  • top/back/body Poplar body
  • fretboard Jatoba White dot inlay
  • fret Medium frets
  • bridge B10 bridge
  • string space 19mm
  • neck pickup Dynamix P neck pickup Passive
  • bridge pickup Dynamix J bridge pickup Passive
  • equalizer Phat II EQ
  • factory tuning 1G,2D,3A,4E
  • string gauge .045/.065/.085/.105
  • hardware color Chrome
• NECK DIMENSIONS
• • • Scale : 864mm/34"
    • a : Width 41mm at NUT
    • b : Width 62mm at 22F
    • c : Thickness 21mm at 1F
    • d : Thickness 22mm at 12F
    • Radius : 305mmR
  • DESCRIPTIONGuitar Neck Diagram
    a: Width of the neck at the nut
    b: Width of the neck at the first fret
    c： Thickness of the neck at the first fret
    d: Thickness of the neck at the twelfth fret
    Radius: Radius of the fingerboard
• CONTROLS DESCRIPTIONThere are four knobs on this bass. The two knobs closest to the bridge are the volume knobs. The knob closest to the input jack is the tone knob, and the 4th knob, closest to the neck, is PHAT II EQ knob.
• FREQUENCY RESPONSE DESCRIPTIONThe variable range of the frequency increases from 20 Hz to the high range, and the variable range decreases from the peak around 100 Hz to around 1000 Hz. The variable width of the frequency becomes large again in the high range from around 1000 Hz, and reaches the peak at around 10,000 Hz, and then becomes smaller again. The variable range around 100 Hz is about 15 dB, the range around 1000 Hz is about 5 dB, and the range around 10000 Hz is about 10 dB.

Features
Phat II EQ

Phat II active bass boost adds additional low-end power.

Jatoba Fretboard

Jatoba has a reddish brown color which produces a rich mid range with a crisp high end.

B10 bridge

The B10 bridge allows fully adjustable intonation and solid tuning stability.