Michigan Synth Works XVI Desktop USB 16 Channel Fader Bank Surface Controller (black faceplate)

XVI Desktop is a 16 channel desktop control surface. Please note: This is NOT a 16n and is NOT compatible with any 16n related software. ***New 2.0 Firmware coming soon with online parameter editor*** IMPORTANT: This device requires a MiniUSB 5V power supply which supplies 500mA or more (not included) for stand alone use. It is NOT recommend for use with passive USB hubs, only powered ones. As of Serial#4161, all devices have TRS MIDI A. The spec has been official for a while now so all MiSW devices will confirm to TRS MIDI A. Basic Usage instructions: Front: Voltage Select switches: Independent for each channel. Does NOT affect MIDI/I2C data. Slider LED colour: To change the LED color, simply remove the cap and rotate the square LED 180s. Do NOT force the LED back in, it should slide in easily, may require wiggling. Side: USB: Mini USB connection for power and/or connection to computer. For use, simply connect to a 5V USB wall wart, 150 mA min (not included). The device is a class compliant MIDI device and requires no drivers. I2C: 2 buffered I2C ports. Can be used as a small I2C hub Dissassembly: Simply remove the 4 screws from the side without the connections, remove the side plate, and slide out the bottom of the device PCB Rear: Power backpack: This is the power supply for the device. When converting to the eurorack configuration, simply remove. There is a standard 10pin power header below. Module Config DIP switch: This allows you to switch between I2C Follower and I2C Leader modes easily. Simply move the switch to the "lead" position and restart the module (you can press the blue reset button once). The other 3 positions are for future expansion and not currently implemented.