Magnetone Techniques Magnetec EQP-1AS Clone Pultec Tube Eq

Our equaliser is a classic Pultec EQP-1A clone . Its filter circuit has an inductor with manually wound thick copper wire on a powerful ferrite ring that provides a good quality factor (Q) and gives excellent tone. This inductor is filled with wax, as in the original Pultec. The filters also have vintage Soviet СГМ capacitors based on silver and mica. Unlike most of modern EQP-1A copies, Magnetec has no printed circuit board. All mounting has been done manually (as in the 50's), with point to point construction, based on carbon resistors. In curcuit we applied Soviet permalloy transformers, basicly used in mixing consoles with large magnetic cores. Unfortunately, their number gradually comes to an end. We also use one of the best Soviet interstage capacitors, paper-oil KBG-MP.
The amplifier is assembled with 6Н3П-ЕВ tubes of increased durability, lifetime of 5,000 hours, they are New old stock, made in the mid-80s by Soviet military. Unlike the most Pultec modern clones, we use kenotron tube rectifier, the same as in the classic EQP-1A. It is important, as rectifier is a part of audio curcuit! The device has a transformer  inputs and outputs, 600 ohm input, large overload capacity.
It produces very distinctive (unlike other EQ's), bright and warm signal as we can hear in 50's and 60's records. Each of our EQs has a pair chosen according to their maximum identity, which can be used as a stereo pair. We hope our EQs will help you in achieving distinctive vintage sound of your recordings.