Astoria, NY, United States
About this listing
Yorkville M1610-2 | 1600W 12-Channel Stereo Powered Mixer with EffectsBrand New with Full Manufacturer's Warranty!10+2 channel stereo box mixer, 2x 800 watts @ 4R, 2x9 band EQs plus Lo/Hi Tone controls, clip LED's, SPIN digital EFX processor with variable effects w/FS jack, balanced ¼” & XLR inputs, 6 mono channels (2 w/HiZ instrument inputs), 2 stereo channels plus tape Input with level control, record output with level control, amplifier assignment switch, phantom power and more2x800w, 10 inputs Mixer/AmpThe convenience, lighter weight and small 'footprint' of a box mixer with the tilt-back visibility and channel control access of a desk mixer makes these new 'wedge' mixers an ideal high power, high quality powered mixer solutions. High-powered high-efficiency class-H power amplifiers, newly designed input strips, on-board DSP, a new, more effective master EQ section and ten very useful and usable input channels complete the new 'wedge' mixer packages.OverviewThe 1600-watt M1610-2 has two integrated 800-watt power amplifiers that can be assigned as stereo mains, or mono main and mono monitor. Each amplifier is attached to an innovative master EQ section designed specifically for these new mixers. The master EQ has a 9-band graphic EQ with additional high and low shelving EQ's at either end of the frequency band. The nine graphic sliders are essentially all of the middle bands of a 15-band graphic EQ with the low and high frequency bands covered by separate shelving controls. This gives the user more control over the feedback-prone mid frequency bands; with high and low tone-shaping frequencies controlled by additional simple +/- 15 dB trim controls.The M1610 has 10 input channels. The first six channels have balanced XLR microphone and TRS balanced inputs, input trim control, three-band EQ, master volume and trim set light. The mono line inputs on channels 5 and 6 are pre-EQ'd for Hi-Z instrument level input, making them an ideal place to start when looking for that perfect live acoustic guitar or direct bass sound. When the input trim level is properly set, users will have ample overall gain while taking full advantage of the new clip elimination circuit which makes it virtually impossible to distort the input of the microphone and instrument channels.Features10 Channels800 watts per channel @ 4 ohm (Assignable Left/Right or Main/Monitor)Gold plated dual contact XLR connectors (all channels)TRS balanced inputs (dual inputs for stereo channels 7/8 and 9/10)"Set" LED's for easy and proper adjustment of Trim control3 bands of EQ on channel strips9 band graphic EQ for each output with shelving EQ for precise controlBuilt in Digital EffectsFootswitch jack for bypassing effectsMute switch (channels 1-8) for quick change-over between band and DJDual RCA Tape/CD In and Rec Out jacksOptional RK1610 rackmount kit (6U)Made in CanadaSpecs Number of Channels: 10Mono Channel EQ: Low, Mid, HighStereo Channel EQ: Low, Mid, HighChannel Effects: AllMonitors Effects: YesBalance Controls: Ch. 7 - 10Pan Controls: Ch. 1 - 6Channel Overload Protection: Ch. 1 - 6Inputs - XLR (bal): 8Inputs - 1/4": 10Inputs - RCA (unbal): 1 PairMute Switches: Global 1 - 8Activity / Solo LED: Trim Set Ch. 1 - 6Clip / Mute LED: All ChannelsPhantom Power: 48V + LED IndicatorInternal Effects: 24 Bit stereo, 16 Effects with Parameter PotAuxiliary Sends: Effect - MonitorEffects Send: YesEffects Return: InternalEffects Return to Main: YesEffects Return to Monitor: YesReverb / Effects Footswitch: YesRecord Outputs: Stereo RCA PairMax Gain to Line Out -Mic Input (dB): 84Max Gain to Line Out -Line Input (dB): 82Master EQ -1 (type/Channels/Range -dB): Graphic 9 band (160hz-6.3khz) +2 band ShelvingMonitor EQ -1 (type/Channels/Range-dB): Graphic 9 band (160hz-6.3khz) +2 band ShelvingMain Outputs (Line Level): 2 x 1/4inch TRSMain Amp Inputs (Line Level): 2 x 1/4inch TRSMonitor Outputs (Line Level): 1 x 1/4inch TRSOutputs - Amp A - 1/4" Jacks: 2Outputs - Amp A - Speakon 4-pin: 1Outputs - Amp B - 1/4" Jacks: 2Outputs - Amp B - Speakon 4-pin: 1Mixer - Signal to Noise Ratio (dB): 101Mixer - Freq Resp (Tone and EQ Flat,±2dB): 20 - 20,000HzMixer- Input Ref Noise to line out @150 Ohms(dBv): -119Mixer THD (Main out w/ -10dB input): 0.0001Amp A-Power Output@8 Ohms (0.1 PER THD 1kHz): 600WAmp A - Power Output @ 4 Ohms: 800WAmp A - Power Output -other: 600E @ 2 ohmsAmp B-Power Output@8 Ohms (0.1 PER THD 1kHz): 600WAmp B - Power Output @ 4 Ohms: 800WAmp B - Power Output -other: 600W @ 2 ohmsTHD - 1kHz (dB): 0.001THD - 20Hz-20kHz (dB): 0.005Hum and Noise (un / Aweight -dB): -101Typical crosstalk -1 kHz (dB-: better than -60dbInput Impedance - Bal/Unbal (Ohms): 20k / 10k ohmsInput Sesitivity (Vrms Sine): 1.4CMRR @ 60Hz (min/typ): -37db / -60dbMax Voltage Gain (dB): 32Power Consumption (typ/max): 6.4A @ 60hz / 3.3A @ 50HzProtection: Thermal, Short Circuit, Current, ClipCooling: 2 x 80mm FansTransformer Type: ToroidialFinish: Grey and Black Powder CoatChassis Construction: Steel and AluminumRackmount: Yes (Kit Available - 6U)Other Features: Tiltback or Upright Wedge AnglesDimensions (DWH, inches): 11.1 x 18.6 x 11Dimensions (DWH, cm): 28 x 47 x 28Weight (lbs/kg): 31.3 / 14.2Specifications subject to change without notice
Price€1,225.10
+ Shipping
Only 1 left
Grab it before it's gone
