Pineville, NC, United States
About this listing
Rode NT-USB+ Desktop Bundle: Broadcast Voice From a Studio Condenser, Boom-Arm Positioned and Reach-Cabled
This bundle pairs the Rode NT-USB+ professional USB condenser microphone with the StreamEye BOOMARM1 desktop boom arm and the Rode SC27 6.6-foot SuperSpeed USB-C cable. One purchase delivers the full desktop signal chain: a studio-grade condenser capsule with onboard APHEX DSP, a properly-positioned boom arm that mounts the mic in front of the host's mouth at the right angle, and a USB-C cable rated for the full 5 Gbps SuperSpeed bandwidth with 60 W power delivery — long enough to reach a laptop on a stand or a host across the desk.
Why the NT-USB+ Sounds Like a Studio Mic Over a Single USB-C Cable
The NT-USB+ uses a 1/2-inch studio condenser capsule with a tight cardioid pattern. The Revolution Preamp built into the mic — the same circuit Rode uses in RodeCaster production consoles — drives the capsule with broadcast cleanliness. 24-bit / 48 kHz internal conversion preserves the full dynamic range. The result is studio-grade voice over a single USB-C cable, with no separate interface and no driver install.
APHEX-Powered Onboard DSP — Broadcast Processing Baked Into the Mic
The onboard DSP runs an APHEX-powered broadcast chain right on the mic body. Noise gate silences keyboard sound between phrases. Compressor smooths volume swings so quiet and loud arrive at the same usable level. High-pass filter trims rumble. Aural Exciter adds air and presence. Big Bottom adds warmth and body. This is processing usually reserved for outboard broadcast hardware — running on the mic, configurable through Rode Connect and Rode Central.
The StreamEye BOOMARM1 Solves Mic Positioning Before You Even Plug In
A mic on a desktop tripod sits low and points up at the host. A condenser like the NT-USB+ wants to be pointed at the mouth at proper speaking distance — that's where the cardioid pattern rejects the most room noise and captures the most warmth. The BOOMARM1 is a 27-inch aluminum alloy boom arm with a parallelogram swing and a desk-clamp mount — it positions the NT-USB+ at proper height and angle, swings out of the way when needed, and holds position without sag. The included detachable mic clip and thread adapters (3/8"" and 5/8"") fit the NT-USB+ ring mount directly.
The SC27 6.6-Foot USB-C Cable Replaces the Short Retail-Box Cable
The NT-USB+ ships with a USB-C cable, but the retail-box length is short — usable for a laptop directly behind the mic, not for a host computer on a stand or across the desk. The SC27 adds 6.6 feet of fully shielded SuperSpeed USB-C cable rated for 5 Gbps data and 60 W power delivery — enough reach to mount the laptop on a screen stand, route the cable behind the desk, or run the mic to a host computer on a shelf. Common-mode rejection keeps WiFi and LED-light interference out of the audio data path.
How the Three Components Work Together
The signal chain is intentional. The NT-USB+ captures broadcast-grade voice. The BOOMARM1 positions the capsule at proper speaking distance and angle so the cardioid pattern works as designed. The SC27 carries the USB-C signal from the mic to the host computer over a properly-rated, properly-shielded run. Each component solves one part of the desktop USB recording problem — and they ship together so the buyer is plug-in-and-record on the first session.
Who This Is For
First-timer building a serious desktop podcast or streaming rig who wants the boom arm and cable handled in one order — no source-the-arm-separately, no source-the-cable-separately. Upgrader replacing a desktop USB headset or a low-end USB mic on a tripod with broadcast-grade studio condenser sound and a properly mounted arm. Spec shopper who wants the 1/2-inch capsule, APHEX DSP, Revolution Preamp combination on a boom arm with shielded SuperSpeed cabling — and wants the whole signal chain right the first time.
Price€206.05
+ Shipping
30-Day Return Policy
Enjoy peace of mind with your new gear
