Reverb Bump
Brand New
About This Listing
Reverend Roundhouse II Violin Brown
Brand new!
BODY - Korina Body, Flame Maple Top
PICKUPS - HA5 Humbuckers
BRIDGE - TOM with Stop Tail
NECK - Three-Piece Korina
SCALE - 24 3/4"
NECK PROFILE - Medium Oval
FINGERBOARD - Pau Ferro - 12" Radius
FRETS - 22 Medium Jumbo
TRUSS ROD - Dual Action - Headstock Access
TUNERS - Reverend Pin-Lock
NUT - 43mm Width - Boneite
CONTROLS - Volume, Tone, Bass Contour, 3-Way
STRINGS - 10-46
CASE - Two-Toned Teardrop (Available Separately)
LIST PRICE - $1559
CUSTOM PICKUPS
We design our own proprietary custom pickups, to achieve the best tonal match with our instruments. Reverend pickups are also specifically designed for each position, for balanced volume and tone when switching.
CUSTOM JACK PLATE
Our proprietary jack plate features four mounting screws, instead of two. The extra screws prevent the plate from tearing out of the body. Made of steel for durability, the laser etched logo adds an extra touch of class!
KORINA BODY
Korina (aka White Limba) is a medium-light weight wood, highly prized for consistency and tonal qualities. Often found in boutique and vintage instruments, all Reverends feature Korina bodies. A highly resonant wood, Korina is a key factor to producing our lively, responsive instruments that are rich in harmonics.
PIN-LOCK TUNERS
A thumbwheel under the tuner pushes a steel pin up through the post, locking the string in place for exceptional tuning stability and super-fast string changes.
CUSTOM DOME KNOBS
Our proprietary knobs feature a lower profile which is less likely to be accidentally hit by the player's hand, and the white dot lets you easily see where your knob rotation is set.
TRIPLE-TREE STRING TREE
This patent-pending string tree has an extended bar to hold down three strings at a time with just one tree, eliminating G string buzz in the nut slot.
TREBLE BLEED CIRCUIT
All Reverend guitars have a treble bleed circuit, preserving the treble when you roll back the volume control. When you roll back a standard volume control, the tone loses treble and becomes dull sounding. Now you can turn down and still sound great!
10% POLY CAPS
We use caps with a +-10% rating, while a typical cap is +-20%. Our caps are made to tighter specifications, so they’re more consistent. Made of polyester, they’re also longer lasting, and less affected by temperature than cheaper ceramic caps. Typically used in expensive boutique guitars.
BASS CONTOUR
This passive bass roll-off is great for tightening up the low end, or re-voicing the pickups. It can make a humbucker sound like a single-coil, or give a P-90 that classic twang. Variable pickup voicing at your fingertips!
INITIALED HEADSTOCK
Every Reverend is hand initialed and serial numbered on the back of the headstock by one of our highly skilled technicians who sets up, inspects, and tests every instrument.
BONEITE NUT
We use "Boneite," a synthetic bone nut, that is more consistent than natural bone, on all Reverend instruments. It reduces friction, allowing the strings to slide through the nut slots smoothly, improving tuning stability.
DUAL-ACTION TRUSS ROD
Our dual action rod adjusts in both directions, allowing back bow or forward bow. This assures correct adjustment range is possible regardless of string tension, extreme climate conditions, or the effects of long term aging. It’s also located at the headstock for easy access.
PURE TONE JACK
All Reverends use an upgraded jack by Pure Tone Technologies. A standard jack has single contacts, but the Pure Tone jack has dual contacts for improved grip, audio signal and reliability. The most dependable guitar jack available.
10% POTS
We use Alpha control pots with a +-10% rating. While a typical pot is +-20%, our pots are built to tighter specifications, making them more consistent. Typically used in expensive boutique guitars, but standard issue in all Reverends.
Brand new!
BODY - Korina Body, Flame Maple Top
PICKUPS - HA5 Humbuckers
BRIDGE - TOM with Stop Tail
NECK - Three-Piece Korina
SCALE - 24 3/4"
NECK PROFILE - Medium Oval
FINGERBOARD - Pau Ferro - 12" Radius
FRETS - 22 Medium Jumbo
TRUSS ROD - Dual Action - Headstock Access
TUNERS - Reverend Pin-Lock
NUT - 43mm Width - Boneite
CONTROLS - Volume, Tone, Bass Contour, 3-Way
STRINGS - 10-46
CASE - Two-Toned Teardrop (Available Separately)
LIST PRICE - $1559
CUSTOM PICKUPS
We design our own proprietary custom pickups, to achieve the best tonal match with our instruments. Reverend pickups are also specifically designed for each position, for balanced volume and tone when switching.
CUSTOM JACK PLATE
Our proprietary jack plate features four mounting screws, instead of two. The extra screws prevent the plate from tearing out of the body. Made of steel for durability, the laser etched logo adds an extra touch of class!
KORINA BODY
Korina (aka White Limba) is a medium-light weight wood, highly prized for consistency and tonal qualities. Often found in boutique and vintage instruments, all Reverends feature Korina bodies. A highly resonant wood, Korina is a key factor to producing our lively, responsive instruments that are rich in harmonics.
PIN-LOCK TUNERS
A thumbwheel under the tuner pushes a steel pin up through the post, locking the string in place for exceptional tuning stability and super-fast string changes.
CUSTOM DOME KNOBS
Our proprietary knobs feature a lower profile which is less likely to be accidentally hit by the player's hand, and the white dot lets you easily see where your knob rotation is set.
TRIPLE-TREE STRING TREE
This patent-pending string tree has an extended bar to hold down three strings at a time with just one tree, eliminating G string buzz in the nut slot.
TREBLE BLEED CIRCUIT
All Reverend guitars have a treble bleed circuit, preserving the treble when you roll back the volume control. When you roll back a standard volume control, the tone loses treble and becomes dull sounding. Now you can turn down and still sound great!
10% POLY CAPS
We use caps with a +-10% rating, while a typical cap is +-20%. Our caps are made to tighter specifications, so they’re more consistent. Made of polyester, they’re also longer lasting, and less affected by temperature than cheaper ceramic caps. Typically used in expensive boutique guitars.
BASS CONTOUR
This passive bass roll-off is great for tightening up the low end, or re-voicing the pickups. It can make a humbucker sound like a single-coil, or give a P-90 that classic twang. Variable pickup voicing at your fingertips!
INITIALED HEADSTOCK
Every Reverend is hand initialed and serial numbered on the back of the headstock by one of our highly skilled technicians who sets up, inspects, and tests every instrument.
BONEITE NUT
We use "Boneite," a synthetic bone nut, that is more consistent than natural bone, on all Reverend instruments. It reduces friction, allowing the strings to slide through the nut slots smoothly, improving tuning stability.
DUAL-ACTION TRUSS ROD
Our dual action rod adjusts in both directions, allowing back bow or forward bow. This assures correct adjustment range is possible regardless of string tension, extreme climate conditions, or the effects of long term aging. It’s also located at the headstock for easy access.
PURE TONE JACK
All Reverends use an upgraded jack by Pure Tone Technologies. A standard jack has single contacts, but the Pure Tone jack has dual contacts for improved grip, audio signal and reliability. The most dependable guitar jack available.
10% POTS
We use Alpha control pots with a +-10% rating. While a typical pot is +-20%, our pots are built to tighter specifications, making them more consistent. Typically used in expensive boutique guitars, but standard issue in all Reverends.
$1,299
Free Shipping
As low as $60/month with
