Earthworks M30BXMP Battery Powered Omnidirectional Measurement Microphone Matched Pair

The M Series has become the accepted standard for affordable, reliable reference and measurement microphones that are accurate in the time domain and frequency response. They are remarkably stable with respect to temperature and atmospheric conditions and are optimized for clean, very fast impulse performance providing accurate wideband response with virtually no handling noise.

 Matched Pair of Battery Operated M30 w/built-in preamp - 9Hz to 30kHz (mic clips and ADP2 adapter included)

• Microphone body opens for replaceable battery access, with a battery life of 300 hours
• Works with RTA apps by using iPad/iPhone to TRRS to XLR mic cable
• 30Hz flat frequency response
• Ideally suited for on-location acoustical measurements including loudspeaker design and quality control, sound system setup and troubleshooting, room acoustics, or any application where an accurate free-field measurement microphone is required and portability is important or a power source is not readily available
• Omnidirectional polar pattern
• Flat frequency response, fast impulse response and exceptional polar characteristics
• Meets or exceeds ANSI Type 1 and applicable IEC 61094 requirements
  
• Each M Series microphone is delivered with its own calibration chart providing its individually measured open-circuit sensitivity and the frequency response curve
  
• Electronic Calibration File available
  
• Operating Temp Range: -10 deg C to +40 deg C ( 14 deg. F to 104 deg. F)
  
• Storage Temp Range: -20 deg C to +50 deg C ( -4 deg. F to 122 deg. F)
  
• Re-calibration recommended every five (5) years