Irmo, SC, United States
About this listing
The Audix SCX25A Microphone is perfect from drum overheads, pianos, and acoustic stringed instruments, providing an elegant design and a patented capsule suspension system. By successfully minimizing acoustic reflections and diffractions, the SCX25A delivers a pure, open air sound with exceptional detail and realism.
The Audix SCX25A Microphone features a uniquely shock-mounted capsule within an intricate machined brass ring, and is completely isolated from the mic body and electronics. The SCX25-A is consistent when responding to on and off-axis signals. This mic exhibits outstanding phase coherence and minimal proximity effect. With a wide cardioid polar pattern, the Audix SCX25A enables the sound engineer to blend the sound of the instrument or vocal with the sound of the room. The Audix SCX25A large diaphragm microphone will handle SPLs in excess of 135 dB and provides up to 20 dB of ambient noise rejection.
Affectionately referred to as "The Lollipop," the Audix SCX25A cardioid studio condenser microphone is perfectly suited to capture the sound of acoustic instruments such as pianos, guitars, vibes, woodwinds, brass, percussion toys, drums, orchestra and symphony sections.
Audix SCX25A Microphone Applications
Piano
Acoustic instruments
Drum overheads
Ambient room mic
Studio, lead and backing vocals
Voice over
Choir
Audix SCX25A Microphone Features
Premium large diaphragm studio microphone for studio or live sound
Delivers pure open air sound
Shock mounted capsule suspension system
Designed, machined, assembled and tested in the USA
Audix SCX25A Microphone Specifications
Transducer Type: Condenser
Frequency Response: 20 Hz - 20 kHz
Polar Pattern: Cardioid
Output Impedance: 200 Ohms
Sensitivity: 28 mV / Pa @ 1k
Equivalent Noise Level: 14 dB (A-Weighted)
Signal to Noise Ratio: 80 dB
Maximum SPL: =135 dB
Dynamic Range: 121 dB
Power Requirements: 48-52 V Phantom
Connector: 3-Pin XLRm
Polarity: Positive Pressure on Diaphragm Produces Positive Voltage on Pin 2 Relative to Pin 3 of Output XLR Connector
Materials / Finish: Machined Brass / Black Finish
Weight: 244 g / 8.6 oz
Length: 148 mm / 5.8 in
Audix SCX25A Microphone Includes
1 x Audix SCX25A Microphone
1 x Metal Adapter to Accommodate 3/8" Microphone Stands
1 x CASEWOOD Foam Lined Wooden Case
1 x DCLIP Microphone Clip
Manufacturer Warranty
Pricekr8,958.06
+ kr797.06 Shipping
kr398.48 shipping when combined
14-Day Return Policy
Enjoy peace of mind with your new gear
