EarCandy 1x8 10 12 15 18 Bass guitar speaker cab Lichtenstein Neutrik Speakon & 1/4 combo input jack

The 1x Bass wiring harness

• This Harness will work with any 1x configuration.
• This harness does not affect the ohm load, The speaker determines the ohm load.
• Designed for use with any Bass guitar speaker cab.
• This harness is 14 gauge OFC pure copper / silver strand Acoustic Research speaker cable.
• We point to point hand wire and solder every harness with silver solder.
• This harness comes pre soldered tips on the connection end
• + and – ( + white striped side and – side with no stripe )
• This harness comes with a diagram, making re wiring your cab fast & easy.
• This Harness comes ready to install with solder on the speaker wire for you.
• We use the very best Lichtenstein Neutrik Speakon & 1/4″ combo input jacks.
• This Input will take speakon or 1/4″ speaker cable
• This will pass all codes domestic and over seas.
• Built with an extra foot of cable for an easier install.

All of the parts of this wiring harness are made in the USA** and are the same top quality materials we use in our Premium guitar and Bass speaker cabs. The Lichtenstein’s are made in Germany, we use them because they are the very best and have a lifetime warranty.

You will receive the wiring diagram complete with a check list, assembled harness, Jack plate cup, Screws, internal speaker wire clamp and input jack, all assembled. Satisfaction Guaranteed! All Harness’s will ship within 24 hours or less, with tracking emailed to you.