Rock'n R Guitars Loaded HH for Strat Pickguard W/GM 1984's & Fast Coil Splits 2026- White Pearl

Rock’N R Guitars LLC Custom Shop

Loaded White Pearl HH Stratocaster Pickguard

****Guitar Madness “1984” Zebra Humbuckers ****

*Fast Coil Splits, Treble Bleed, Separate Neck, and Bridge Tone Pots, Orange Drop Caps

**Protective plastic is still on pickups**

***Requires 1-3/8" depth in control cavity***

****Please check to see if your Strat body will accept an HH Configuration****

*1 Set Guitar Madness “1984” Zebra Humbuckers

*1 4-Ply White Pearl  Copper Shielded HH Stratocaster Pickguard

*1 Oak Grigsby 3-Way Switch

*1 TAOT Branded CTS 500K Potentiometer (Volume) (TAOT Branded CTS Pots = Better Quality)

*1 Stew Mac Branded CTS 500K Potentiometer (Neck Tone) (Stew Mac CTS Pots = Better Quality)

*1 CTS 500K DPDT Push/Pull Potentiometer (Bridge Tone and Coil Splits)

*2 Orange Drop .022uf Capacitors

*1 RRG Treble Bleed. (Orange Drop .001uf Capacitor W/150Kohm Resister)

*3 Black Strat Knob

*1 Black Switch Knob

Coil Splits:

The bottom tone pot is a push/pull pot. When the knob is lifted it cuts the coils on both humbuckers making them single coils. This is an excellent tone option.  

Treble Bleed:

A Treble Bleed allows the highs to pass through the Volume pot as you roll off the Volume. What this does is keep the Brightness and the Clarity of the pickups the same as you roll down the volume. You have the same clarity and brightness at 10 as you would at 9,8,7,6 and so on. This is a super nice!

Guitar Madness 1984 Zebra Humbuckers:

Designed to give that powerful midrange rock sound. These are made for excessive distortion without being overbearing and noisy. Most pickups playing that 80’s sound need to be excessively palmed muted and dampened. You’ll find these a bit easier to control with the gain and distortion up. These will not disappoint!

This is a great way to update your Stratocaster. We only use Top-of-the-Line Components, and that makes all the difference.

These pickguards are designed to fit most USA/MIM Strat’s’, full thickness Squier bodies (1-3/4”), and other Strat type guitars with at least 1-3/8” depth in the control cavity. As in all aftermarket pickguards the pickguard screw holes may be slightly off due to the year of manufacture, model, and plants the guitars were manufactured in. You may need to drill a few new screw holes in your guitar body to line up with the Pickguard screw holes. 

Own this gear?