Marshall 2x12 1966B Replica with Celestion G12H-75 Creamback and G12H-150 Redback

Here's a replica of a Marshall 1966B 2x12 cabinet. It is made of solid birch ply on all sides, back and baffle. It is solid and properly made. The only deviations from the stock speaker are the "strings", running perpendicular to the front on the top and bottom, are slightly wider with more gold braided material rather than the dull single filament "bronze" colored material. The rear speaker jack is not a stock marshall. Lastly, the front baffle is not tilted back. It is straight with the front. Otherwise, the dimensions and handles are exactly the same as the original.

The 1966B is designed to fit a small box head. It's dimensions are 26" wide x 27" tall x 14" deep.

It has a two 16 ohm Celestion speakers: a G12H-75 Creamback and a G12H-150 Redback. The combination of these gives a full range sound with especially good low end.

The two speakers are wired in parallel to provide an 8 ohm load. There are two input jacks. One is labeled 8 ohms. Using this input plays through both speakers at an 8 ohm load. You can also play two amps into this cabinet by using both inputs. When both inputs are in use, only one speaker is being played for a 16 ohm load in each.

If you'd rather, I could easily change the wiring so that one jack is an 8 ohm input and the other is a through or output. Let me know if you'd rather have that instead of the stereo configuration.

This is a great sounding cabinet. It has never gigged having only been used in my smoke free home studio.