Akai AA-1150 1978-1979 - Walnut

The Akai AA-1150 AM/FM Stereo Receiver, manufactured in 1978-79, boasts a robust power output of 50 watts per channel into 8Ω, offering ample headroom for high-fidelity audio playback. With a wide frequency response spanning from 6Hz to 70kHz, it delivers rich and detailed sound reproduction across the audio spectrum. Its low total harmonic distortion of 0.1% ensures clean, distortion-free audio, while a damping factor of 30 contributes to tight and controlled bass response. Additionally, it features impressive signal-to-noise ratios of 80dB for MM inputs and 90dB for line inputs, ensuring minimal background noise and clear sound quality. With its versatile input options, solid construction, and reliable performance, the Akai AA-1150 remains a sought-after vintage receiver among audiophiles.

The receiver is in very good used condition. It has some light usage mark visible on the front. The wood looks very good with almost no signs of use, there is a little pealing on the back left corner. The power chord has few spots with open wire that has been tapped over with electrical tape. The loudness button has been broken. One of the legs is missing. A few minor things that can be easily fixed. 

All inputs and outputs have been tested, The receiver sounded amazing. All lights work and potentiometers have been cleaned with deoxit. 

Specifications:

Tuning range: FM, MW

Power output: 50 watts per channel into 8Ω (stereo)

Frequency response: 6Hz to 70kHz

Total harmonic distortion: 0.1%

Damping factor: 30

Input sensitivity: 3mV (MM), 150mV (DIN), 150mV (line)

Signal to noise ratio: 80dB (MM), 90dB (line)

Channel separation: 55dB (MM)

Output: 150mV (line), 30mV (DIN)

Speaker load impedance: 4Ω to 16Ω

Semiconductors: 4 x IC, 1 x FET, 39 x transistors, 24 x diodes

Dimensions: 480 x 155 x 345mm

Weight: 11.7kg

Voltage: 220V

Cables : Not included