Janne Da Arc Ka-yu Signature Model
Uniquely shaped alder body, 864mm scale maple neck, rose fingerboard configuration, and two FBH-400K humbucker pickups.
Controls are a master volume and pickup selector rotary switch and a kill switch.
There are scratches, dings, and paint chips near the body back panel.
The neck is in good playing condition.
Item Rank: B+: Some scratches, but no problems in normal use.
Case: Soft case
Weight: 4.26kg
Truss Rod: No problem, rod is at 60 degrees to the left and right, no problem.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 37.5mm
Neck thickness near 1st fret: 20.4mm
Neck thickness near 12th fret: 23.1mm
SCALE: 864mm (34")
RADIUS: 305mm (12")
Strings in setup: Galli Strings / .045-.105 set
Repair and Maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing
Specs
Item Rank
B+: Some scratches, but no problem for normal use
12 months old
Case
Soft case
Weight
4.26kg
Truss Rod
No problem, rod is fine, checked up to 60 degrees left and right.
Fret Remaining
No problem, there is enough fret height
String Height Low String Side
2.5mm above 12th fret
String height on treble string side
2.0mm above the 12th fret
Nut width
37.5mm
Neck thickness near 1st fret
20.4mm
Neck thickness near 12th fret
23.1mm
Scale
864mm (34")
RADIUS
305mm (12")
Strings for setup
Galli Strings / .045-.105 set
Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing
*** The shipping cost to most countries is included in the listed price ***
All musical instruments we sell have been checked and adjusted for playability. The pictures in the listings are of the actual item so please have a look for an idea of the cosmetic condition. As they are used instruments they may or may not have some scratches or wear to the finish. Please note: Ishibashi will not accept returns or refunds in the case of dents, scratches, or cosmetic wear that were orignally detailed either in the pictures or description. Thank you for your understanding.
Condition: Some scratches, dents and marks. If you would like to know more about this specific instrument, or have general questions, please don't hesitate to contact us.
Accessories: Please confirm the picture.
Precautions for electronic instruments that use a power supply
The voltage in Japan is 100 V, it is different from most of other countries, you need confirm the voltage of your country and in some cases you have to get locally an adaptor for converting the voltage before use it in your country.
Please note!
Not all of the items you purchase from us are in our Shibuya store in Tokyo where we do all of our international communications from. Please be patient while we do inter-company transfers on your items. Once the item arrives here, we will check it over one more time before shipping it out. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from Monday to Saturday 11:00am until 6:00pm (Tokyo time zone) 6 days a week, closed on Sunday.** Please note that all items for sale on here are also available at our retail stores in Japan. There is a chance that they may sell out in our retail location beforehand. We update our information daily, but there is still a chance this may occur. In this event we will cancel the order and refund any payments received. Thank you for your understanding.
More information please confirm our shop policy.
Uniquely shaped alder body, 864mm scale maple neck, rose fingerboard configuration, and two FBH-400K humbucker pickups.
Controls are a master volume and pickup selector rotary switch and a kill switch.
There are scratches, dings, and paint chips near the body back panel.
The neck is in good playing condition.
Item Rank: B+: Some scratches, but no problems in normal use.
Case: Soft case
Weight: 4.26kg
Truss Rod: No problem, rod is at 60 degrees to the left and right, no problem.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 37.5mm
Neck thickness near 1st fret: 20.4mm
Neck thickness near 12th fret: 23.1mm
SCALE: 864mm (34")
RADIUS: 305mm (12")
Strings in setup: Galli Strings / .045-.105 set
Repair and Maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing
Specs
Item Rank
B+: Some scratches, but no problem for normal use
12 months old
Case
Soft case
Weight
4.26kg
Truss Rod
No problem, rod is fine, checked up to 60 degrees left and right.
Fret Remaining
No problem, there is enough fret height
String Height Low String Side
2.5mm above 12th fret
String height on treble string side
2.0mm above the 12th fret
Nut width
37.5mm
Neck thickness near 1st fret
20.4mm
Neck thickness near 12th fret
23.1mm
Scale
864mm (34")
RADIUS
305mm (12")
Strings for setup
Galli Strings / .045-.105 set
Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing
*** The shipping cost to most countries is included in the listed price ***
All musical instruments we sell have been checked and adjusted for playability. The pictures in the listings are of the actual item so please have a look for an idea of the cosmetic condition. As they are used instruments they may or may not have some scratches or wear to the finish. Please note: Ishibashi will not accept returns or refunds in the case of dents, scratches, or cosmetic wear that were orignally detailed either in the pictures or description. Thank you for your understanding.
Condition: Some scratches, dents and marks. If you would like to know more about this specific instrument, or have general questions, please don't hesitate to contact us.
Accessories: Please confirm the picture.
Precautions for electronic instruments that use a power supply
The voltage in Japan is 100 V, it is different from most of other countries, you need confirm the voltage of your country and in some cases you have to get locally an adaptor for converting the voltage before use it in your country.
Please note!
Not all of the items you purchase from us are in our Shibuya store in Tokyo where we do all of our international communications from. Please be patient while we do inter-company transfers on your items. Once the item arrives here, we will check it over one more time before shipping it out. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from Monday to Saturday 11:00am until 6:00pm (Tokyo time zone) 6 days a week, closed on Sunday.** Please note that all items for sale on here are also available at our retail stores in Japan. There is a chance that they may sell out in our retail location beforehand. We update our information daily, but there is still a chance this may occur. In this event we will cancel the order and refund any payments received. Thank you for your understanding.
More information please confirm our shop policy.
| Listed | 2 years ago |
|---|---|
| Condition | Very Good (Used) Very Good items may show a few slight marks or scratches but are fully functional and in overall great shape.Learn more |
| Brand | |
| Model |
|
| Finish |
|
| Year |
|
Product safety information may be available here.









