The Radial Engineering Catapult is a passive audio snake that allows you to send four channels of analog audio over standard Cat 5 or Cat 6 Ethernet cable.

Analog audio over Cat 5 wiring

The Catapult TX4 and RX4 act like a typical four-channel analog audio snake; they allow you to send mic or line-level signals from one location to another without signal loss, noise, or interference, and without any digital audio conversion needed. What makes the Catapult system unique is that it utilizes Cat 5 Ethernet cable, which is widely available, lightweight, and economical. Simply connect a shielded Cat 5 cable between any two Catapult modules and they will use the analog conductors in the cable to deliver four balanced audio lines to any destination.

Straight-wire passive operation

Catapult modules require no power to operate, and since they keep the signal in the analog realm, no digital conversion is necessary. Straight-wire connection from the XLRs to the RJ45 connector on a Cat 5 cable ensures that your audio passes through without coloration or distortion.

Utilize pre-existing cable installations

As many buildings are already pre-wired for Cat 5, you can take advantage of this to transmit audio between distant rooms without the need to install or supply new cabling. This eliminates the need for bulky and expensive multi-channel audio cable, and allows contractors to benefit from installed network cable and easily connect from one room to another.

Mix & Match to add transformer isolation

All of the Radial Catapult modules are compatible with each other, and each is sold individually, so you can select whichever combination best suits your needs. The Catapult RX4 and TX4 can be used together as a pair, creating a 4-channel audio snake. However, if you need transformer isolation to prevent hum and buzz when splitting audio signals, two additional models of Catapults are available. The TX4L and RX4L have line level isolation transformers for splitting playback tracks or outputs to amp racks, while the TX4M and RX4M can be employed when splitting mic signals on stage. Use any combination of these six models, along with the compact Catapult Mini RX and TX to create a custom snake designed for your unique application.

Product Specifications:

Audio Circuit Type: Passive splitter

Frequency Response: 7Hz ~ 20KHz

Dynamic Range: 140dB

Total Harmonic Distortion: 0.0005% @ 1kHz

Common Mode Rejection Ratio: >103dB

Maximum Input: +35dBu

Features: Ground lift

Input Connectors: XLR, RJ45

Output Connectors: XLR, RJ45

Construction: 14-gauge steel chassis & outer shell

Size (L x W x D): L: 8 1/8 x W: 4 1/8 x H: 2

Weight: 2.6 LBS

Shipping Size (L x W x D): L: 11 x W: 5 x H: 2.75

Shipping Weight: 2.9 LBS

Power: Passive, no power required

Conditions: For use in dry locations only between 5°C and 40°C

ConditionBrand New (New)
Brand New items are sold by an authorized dealer or original builder and include all original packaging.Learn more
Brand
Model
  • Catapult TX4M
Categories

HollywoodGuitars

Los Angeles, CA, United States
Sales:5,345
Joined Reverb:2013

Reverb Protection

Simple Returns, Secure Transactions, Human Support

Learn more

Secure Checkout

Reverb Gives

Your purchases help youth music programs get the gear they need to make music.

Carbon-Offset Shipping

Your purchases also help protect forests, including trees traditionally used to make instruments.

Oops, looks like you forgot something. Please check the fields highlighted in red.